Balanced Audio Technology VK-33 Owner's Manual - page 19
19
With the VK-33 in its OFF or STANDBY state, simply press the POWER
button on the VK-R3 remote control transmitter.
Fuse Protection:
A blown fuse in the VK-33 is an indication of a serious problem. If a replacement
fuse fails as well, no further attempts should be undertaken. Please contact the
factory for professional service.
The proper fuse ratings are as follows:
For 100-120 VAC Units:
2A 250V Slow Blow
For 200-240 VAC Units:
1.5A 250V Slow Blow
Factory supplied fuses should be only replaced with the same type
and rating parts.
Servicing
The Balanced Audio Technology VK-33 should require no service in normal
operation. Please direct any further service inquiries to the factory.
Cleaning
To remove dust, occasionally wipe the front and top surfaces of your VK-33 with
a damp soft cloth. If fingerprints appear, you may use a mild, non-alkaline soap
solution. Do not use abrasive cleaners, as they may damage the fine finish of the
unit.
RESETTING THE VK-33:
Under certain conditions it might become desirable to reset the internal
microprocessor that controls all the functions of the VK-33.
Doing so will erase ALL user programmed setpoints, and will return the unit to its
factory default state.
In order to RESET the VK-33, do the following:
1. Turn the unit OFF.
2. Disconnect the power cord from the back of the unit.
3. Wait about two minutes.