Balanced Audio Technology VK-75SE Owner's Manual

Manual is about: Special Edition Balanced Power Amplifier

Summary of VK-75SE

  • Page 1

    Vk-75se warranty registration form unit serial number: _______________________________________ customer name: _______________________________________ address: _______________________________________ _______________________________________ date of purchase: _______________________________________ pur...

  • Page 2: Vk-75Se

    Vk-75se special edition balanced power amplifier owner's manual 1300 first state blvd. Suite a w ilmington, de 19804 tel: 302-999-8855 fax: 302-999-8818.

  • Page 3

    Introduction thank you for your purchase of the balanced audio technology vk-75se power amplifier. Please read this owner’s manual to obtain the full benefit of the vk-75se in your system. This manual provides you with necessary safety information and operating procedures for this exceptional unit. ...

  • Page 4

    Installing tubes 1. Install 6sn7 tubes in positions v1 through v6 2. Install 6h30 supertubes in positions v7 and v8 3. Install 6c33 tubes in positions v9 through v12 4. Install 6v6gt tubes in positions v13 and v14 note: care must be exercised when installing the 6c33 output tubes. While inserting th...

  • Page 5

    Physical placement it is recommended that you provide open space above the unit for proper ventilation, with no electronic components placed directly overhead. Mount the unit on a hard surface with proper ventilation underneath. Avoid placing the unit directly on a carpeted floor. Connecting the vk-...

  • Page 6

    Operating the vk-75se normal operation of the vk-75se requires simply turning the unit on. There are no meters to connect, bias setpoints to remember, or drifting bias points to adjust. Please read the autobias feature section for more details. Turning the vk-75se on: the power switch is located at ...

  • Page 7

    Replacing fuses: warning: please turn the unit off and disconnect the power cord before proceeding. There are five fuses in the vk-75se. The main slow-blow fuse (10a rating for 110- 120vac line voltage and 5a for the 200-240vac range) is located on the unit’s back panel. The four 3a fast-acting prot...

  • Page 8

    Servicing: the balanced audio technology vk-75se should require no service other than tube replacement to maintain its high performance. Please direct any further service inquiries to the factory. Cleaning: to remove dust, occasionally wipe the front and top surfaces of your vk-75se with a damp soft...

  • Page 9

    Vk-75se five year limited warranty terms and conditions 1. Limited warranty upon receipt of the attached warranty registration form, balanced audio technology warrants the purchased product to be free from manufacturing, materials, and workmanship defects for five years from date of original purchas...