Balanced Audio Technology VK-75SE Owner's Manual - page 5
Physical Placement
It is recommended that you provide open space above the unit for proper ventilation, with
no electronic components placed directly overhead.
Mount the unit on a hard surface with proper ventilation underneath. Avoid placing the
unit directly on a carpeted floor.
Connecting the VK-75SE to Your System
For Balanced Preamplifiers:
Use balanced XLR interconnects. The left and right channel input connectors are clearly
marked on the back panel of the VK-75SE.
Note: The VK-75SE XLR inputs are wired as follows:
Pin 1:
common/shield
Pin 2:
positive
Pin 3:
negative
For Single-Ended Preamplifiers:
Single-ended preamplifiers have RCA connectors. The VK-75SE power amplifier is
designed to work with either balanced or single-ended preamplifiers connected to its inputs.
All that is required to connect a single-ended preamplifier with RCA connectors to the
VK-75SE’s inputs is the optional balanced to single-ended adapters. These adapters are
available from Balanced Audio Technology at a nominal charge.
For Speaker Connections:
The speaker connectors are clearly marked on the back panel of the VK-75SE. There are
several sets of output taps marked LOW, MEDIUM and HIGH for connecting a variety of
speakers to the VK-75SE. Please note that some experimentation may be required. Try
each output tap until you find the one that gives the most balanced performance in your
system
.