BALAY 3HW459X Instruction Manual - Childproof Lock
10
You will see the cooking time counting down in the display.
When the cooking time has elapsed
A signal sounds.
Press the
0
button to cancel the signal before it sounds.
Open the appliance door and carefully remove the cookware
with oven gloves.
Press the
#
button to switch off the appliance.
Changing the cooking time
Press the
0
button twice. Change the cooking time using the
rotary selector. The changed cooking time starts to count down.
Checking time settings
You can call up all settings using the
0
button.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
■
all types of heating
■
the microwave
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time to 12.45. The oven goes into standby.
Cooking starts at 12.00 and finishes at 12.45.
This function is also available for the cleaning function. You can
shift the time of the cleaning operation so it is carried out at
night, which means that the appliance is available at all times
during the day.
Moving the end
Prerequisite: The selected operation has not begun yet, and a
cooking time has been set.
1. Press the
0
button repeatedly until the arrow is pointing to
the symbol for the end time:
yO
.
The bars on the display show that the end time has not been
delayed.
2. Using the rotary selector, move the end time to later.
3. Confirm by pressing the
@
button.
The setting is applied. The appliance is in standby mode,
the
yO
End time is displayed.
Operation starts automatically at the appropriate time. In the
example, operation starts at 12.00 noon. The
xO
cooking time
then counts down on the display.
The cooking time has elapsed.
A signal sounds. The oven stops heating. You can cancel the
signal earlier by pressing the
0
button.
Adjusting the end time
This is only possible if the oven is on standby. To do this, use
the
0
button to switch to
yO
End time and use the rotary
selector to correct the end time.
Cancelling the end time
This is only possible if the oven is on standby. To do this, use
the
0
button to switch to
yO
End time and turn the rotary
selector to the left until --:-- appears. The cooking time elapses
immediately.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut, 4 zeros will flash in the clock display and a
signal will sound.
1. Set the right time using the rotary selector.
2. Press the
0
button.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
1. Press the
0
button twice.
The arrow is next to the symbol for the clock
0O
.
2. Change the time using the rotary selector.
3. Press the
0
button.
The new time is applied.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can also hide the clock. Then it will only
appear when the oven is switched on. For more information,
refer to the Basic settings section.
Childproof lock
The oven has a childproof lock to prevent children from
switching it on by accident or changing an operation that is
already in progress.
Activating the childproof lock
Press and hold the
@
button for approximately four seconds
until the
@
symbol appears.
The childproof lock is switched on.
Releasing the lock
Press and hold the
@
button until the
@
symbol goes out.
The childproof lock is switched off.
Note: Even if the childproof lock is active, you can still switch
off the oven with
#
, set the timer and turn off the acoustic
signal.
After a power cut, the childproof lock will no longer be active.
LH
I
NJO
¡$
LH
I
NJO
¡$
LH
I
NJO
¡$