Baldwin Boxall BVRD series Installation Instructions Manual - page 22
BVRD Series Microphones
Installation Instructions
16
BVRD Series Microphones issue 5
4.4.3 To Play a DVA Message to All Zones
1. Press the Zone Selection button configured for “Select All” or
press every Zone Selection Button (Item B in Figure 4.1), or
press the relevant Function Button (Item C in Figure 4.1).
2. Press the required message selection button (Item G in
Figure 4.1), using Message Navigation buttons (Item H in
Figure 4.1) to find the message if required.
3. The Message will be broadcast to all zones and zone status
displays will show the selected DVA Message as the source.
4.4.4 To Cancel a DVA Message to All Zones
1. Press the Zone Selection button configured for “Select All” or
press every Zone Selection Button (Item B in Figure 4.1), or
press the relevant Function Button (Item C in Figure 4.1).
2. Press the “Message Cancel” button (Item G in Figure 4.1).
4.4.5 To Play a DVA Message to Selected Zones
1. Press the Zone Selection button (Item B in Figure 4.1) for the
required zones.
2. Press the required message selection button (Item G in
Figure 4.1).
3. The Message will be broadcast to the selected zones and the
zone status displays will show the selected DVA Message.
4.4.6 To Cancel DVA Messages to Selected Zones
1. Press the Zone Selection button (Item B in Figure 4.1) for the
required zones.
2. Press the “Message Cancel” button (Item G in Figure 4.1).
N
OTE
: It is possible to cancel different DVA Messages at the same time.