Balluff BIS L-87 Quick Manual - page 10
Handheld Programmer
BIS L-87_
10
3.3
COLD RESET or
battery
replacement
Saving your own
profile with "Total
Recall"
3.4 Turning
the
Handheld
Programmer on/
off
Turning on
Turning off
3.5 Keyboard,
display
and operating
concept
3.6 Creating
your
own operating
interface
Note
Removing the battery pack or performing a cold reset will delete data, drivers and
settings form the RAM of the unit!
The program "Total Recall" can be used to save the personal profile so that it is
automatically loaded after a cold reset.
The program "Total Recall" is located in the "Control Panel" of the Workabout Pro.
To open the Control Panel:
–
Double-click on the program
–
(or select it and in the upper left corner select
A new window opens; click on
–
Change
–
Change
–
Keep
–
Click on
–
–
–
Click on
–
In the
–
Requirements:
Supply voltage is present (battery pack used and charged, device is in the docking station of
–
power supply is connected).
Attention!
This is a Class A product. When using this product indoors, the device may cause RF
interference, requiring the user to take appropriate measures.
Hold down
►
As soon as the green LED flashes, release the
The start screen <(Today)> will be displayed.
⇒
Note
If the device was used previously, it can happen that it is in Suspend mode; pressing
switched to Suspend mode is displayed again.
– Suspend –
Press
►
or
From the start menu select
►
"Shutdown > Suspend" .
Familiarize yourself with the operating concept and characteristics of the WORKABOUT PRO.
The operating manual can be found
on the included CD.
The most recent documents are available in the Internet at:
http:// www.psion-teklogix.com/.
Note
The BALLUFF.dll was developed as an independent software for creating a custom
tailored operating interface, for the Handheld Programmer. The ordering code for this
application is available on demand.
Getting Started
3