Balluff BIS L-87 Quick Manual - page 4
Handheld Programmer
BIS L-87_
4
1.1 CE Declaration of
Conformity and
user safety
1.2 Scope of Delivery
1.3 About
this
manual
1.4 Manual
organization
Declaration of Conformity
This product was developed and produced in compliance with applicable European
standards and directives.
Note
You can request a Declaration of Conformity separately.
For additional safety instructions, refer to the
"Safety" section on page 6
Included in the scope of delivery:
Handheld Programmer BIS L-87_
–
BIS Software CD
–
Power supply
–
Printed Manual
–
This manual describes the operation of the BIS L-87_ Identification System together with the
"Workabout Pro" handheld computer made by "PSION Teklogix GmbH.
The present manual does not describe:
Startup, operation and care of the "Workabout Pro" handheld computer,
–
Installation and operation of accessories and expansion devices,
–
Docking station and device interfaces.
–
This information is found in the manuals from PSION Teklogix GmbH
on the enclosed CD
.
The most current documentation can be found
on the Internet at "www.psionteklogix.com"
.
Note
A detailed user‘s guide for the processor can be found on the accompanying BIS-CD
or in the Internet under www.balluff.com.
The manual is organized so that the sections build on each other.
Section 2: Basic safety information.
Section 3: First steps (starting the software).
Section 4: Processing data carriers and using files.
Section 5: Connecting the Handheld Programmer to the PC.
Section 6: Technical data for the identification system.
User Instructions
1