Balt Split-Level-36 Assembly Instructions Manual - page 4
4
Attach Crossbrace (P6)
between Leg Receivers
(P7) using 2 Screws (A1)
as shown in illustration #4.
B
5.)
6.)
7.)
A
10.)
Illustration # 3
Illustration # 4
Slide 2 Leg Receivers (P7) over 2
Upper Inserts (P3) and 2 Upper
Inserts (P4) as shown in illustration
#4. Secure at desired height using 8
each (A) Screws and 8 each (C)
Square nuts (flat side of the nut
should be next to the metal).
Attach Crossbrace (P6) to the
Upper Inserts (P3 & P4) using 2
Screws (A1) as shown in
illustration #3.
Place the Keyboard Platform (P2) with
the insert nuts facing up. Attach 1 each
Upper Insert (P3) and 1 each Upper Insert
(P4) using 4 each (B) screws.
(Finger tighten only)
Attach Stability Panel (P5) to
the Upper Inserts (P3 & P4)
using 4 Screws ( A) as shown
in illustration #3.
P6
A1
B
P5
P3
P2
P4
C
A
C
F
A1
P7
P7
P6
Attach 4 each (F) Leveling
Glides to the 2 each Leg
receivers (P7) .
(Tighten all the screws at this
time using Allen Wrench (G)).
9.)
8.)
A
P3
P4