Balt Split-Level-36 Assembly Instructions Manual - page 5
of
7
5
A1
CPU
Assembly
A1
Attach 2 each Glides (F) to the 2 Feet (P9)
as shown in illustration #5.
Place the CPU Platform (P10) with the
insert nuts facing up. Attach 2 each CPU
Feet (P9) using 4 each (A2) screws.
(Finger tighten only)
Attach 1 each CPU Rail (P8) to the CPU
Platform (P10) using 2 each (A1) screws.
(Finger tighten only)
(Tighten all the screws at this time
using Allen Wrench (G)).
11.)
12.)
13.)
P9
P9
A2
A1
A2
F
F
P8
P10
Attach 1 each CPU Assembly to the out-
side of Leg Receiver (P7) using 2 Screws
(A1) as shown in illustration #6.
P7
Illustration # 5
Illustration # 6
14.)