Guide beolab 7–1 ug02 beolab 7-1 (non-bv7)_eng.Indd 1 ug02 beolab 7-1 (non-bv7)_eng.Indd 1 9/30/04 11:24:25 am 9/30/04 11:24:25 am.
Warning: to prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splash- ing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equip- ment from the ac main...
3 daily use when you have fi nished setting up the loudspeaker as described on the following pages, connect the entire system to the mains. Loudspeaker protection the loudspeaker is equipped with a thermal protection system which prevents damage from overheating. If an error occurs – or the speaker ...
4 set up the loudspeaker we recommend that you follow this procedure: – disconnect your bang & olufsen system from the mains. – place the loudspeaker according to the guidelines on this page. – use the enclosed accessories to mount the loudspeaker to the beovision stand or wall bracket as explained ...
A b c c d d c c 5 on this page is shown how to fasten the loudspeaker to the wall bracket (optional accessory). For information on how to set up the wall bracket, refer to the guide enclosed with the wall bracket. A fasten the loudspeaker bracket to the wall bracket. Use the two longest screws (m5 ×...
6 to connect the loudspeaker to your system, you will require a mains cord and a power link cable. These cables are available as optional accessories from your bang & olufsen retailer. Use a power link cable of the correct type to connect the loudspeaker to a power link socket on the bang & olufsen ...
Power link mk 3 7 cable clamp: for safety reasons, the mains cord from the wall outlet must be secured to the loudspeaker. To do so, tug the cord behind the clamp. Power link cable: do not use a cable of the older type, as this will cause noise, and therefore not give optimum sound quality! The new ...
F w 8 adapt the loudspeaker to your room when a loudspeaker is placed in a corner or close to a wall, the bass level is boosted compared to the bass level from a loudspeaker placed in a more free-standing position. To remove this excessive bass boost, use the position switch to ensure that the bass ...
9 ug02 beolab 7-1 (non-bv7)_eng.Indd 9 ug02 beolab 7-1 (non-bv7)_eng.Indd 9 9/30/04 11:24:29 am 9/30/04 11:24:29 am.
10 t v s f f t ug02 beolab 7-1 (non-bv7)_eng.Indd 10 ug02 beolab 7-1 (non-bv7)_eng.Indd 10 9/30/04 11:24:29 am 9/30/04 11:24:29 am.
Til det norske marked! Mekaniske og elektroniske komponenter i produktene slites ved bruk. Det må derfor påregnes reparasjoner og utskiftning af komponenter innenfor kjøpslovens reklamasjonstid, som må regnes som vedlikehold av produktene. Slik vedligehold gir ikke grunnlag for å rette mangelskrav m...
Www.Bang-olufsen.Com ug02 beolab 7-1 (non-bv7)_eng.Indd 12 ug02 beolab 7-1 (non-bv7)_eng.Indd 12 9/30/04 11:24:30 am 9/30/04 11:24:30 am.
