Bang & Olufsen BeoSystem 3 Manual - page 46
Connection panels
Any equipment you connect to the main connection panel must be registered in
the ‘CONNECTIONS’ menu. See p. 41.
HDMI source
You can watch two HDMI sources at the same time if one of the sources is connected to the HDMI A or
HDMI B socket, and the other source is connected to the HDMI C or HDMI D socket.
Useful hints
AV1
Socket group for AV connection of a primary
video recorder, set-top box, or other types of
extra video equipment.
AV2
Socket group for AV connection of additional
video equip ment.
AV3
Socket group for AV connection of additional
video equip ment.
The TV keeps a signal path open between a
recorder connected to the AV1 socket area and a
recordable source connected to the AV3 socket
area.
This allows you to set the source on AV3 to switch
on automatically, as well as set a recorder on AV1
for timed recording of the source on AV3, provided
your connected equipment supports these
functions.
AV4
Socket group for AV connection of additional
video equipment.
AV5
Use this socket group for equipment which you
do not wish to have permanently connected, e.g.
a camera or a camcorder. You can also connect a
BeoMaster to AV5.
AV6
Use this socket group for equipment which you
do not wish to have permanently connected, e.g.
a camera or a camcorder.
CTRL
(AV1–AV6)
For IR control signals to external equipment
connected to an AV socket.
POWER LINK
CONTROL
CENTRE 1
CINEMA
MONITOR
IR IN
DTV DATA
MASTER LINK
1(SUB)
1
2
3
2
3
4
TTL
5
6
ANT
HDMI IN
DVI-D OUT
AV 4
AV 3
RS232
IR IN
CTRL
SPDIF
VIDEO IN L IN
R IN
IR 1+2
S VIDEO
VIDEO IN L IN
R IN
Y
Pb
Pr
AV 2
AV 5
AV 1
L IN
VIDEO IN
DISPLAY 1
R IN
SPDIF
L OUT
VIDEO
OUT
R OUT CTRL
R IN
L IN
VIDEO
IN
SPDIF
CTRL
DISPLAY 2
A
B
C
D
AV 6
R IN
L IN
VIDEO
IN
SPDIF
CTRL
VGA
S VIDEO
Pr
Pb
SPDIF CTRL
Y
L IN
VIDEO IN
R IN
SPDIF
L OUT R OUT
VIDEO
OUT
CTRL
44