Bang & Olufsen BeoSystem 3 Manual - page 47
“Greyed out” sockets on the illustration of the main connection panel may be
occupied by internal connections. Do not disconnect the cables from these sockets!
NOTE! Video recorders can only be connected to
the AV1 and AV2 socket groups, as these are the
only sockets groups for video output. Connect the
primary recorder to AV1 and the secondary
recorder to AV2.
POWER LINK 1
(SUB)
POWER LINK 2–6
Use a cable splitter to connect two Bang & Olufsen subwoofers.
For external speakers in a surround sound setup. See also pp. 50–51.
L-IN, R-IN
(AV1–AV6)
Right and left line input.
L–R OUT
(AV1–AV2)
Right and left line output.
VIDEO IN
(AV1–AV6)
For video signal.
VIDEO OUT
(AV1–AV2)
For a video recorder.
Y – Pb – Pr
(AV2–AV3)
For video signals from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
SPDIF
(AV1–AV6)
Digital audio input socket, e.g. DVD player.
S VIDEO
(AV4, AV6)
For S-VHS or Hi-8 Camcorders.
DISPLAY 1 – 2
(DVI-D OUT)
Connect a plasma screen and/or a projector. If you
only connect a screen or a projector, connect it to
DISPLAY 1, otherwise connect the screen to
DISPLAY 1 and the projector to DISPLAY 2. You
cannot connect two screens or two projectors at
the same time.
HDMI IN
(A–D)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. Connect an HDMI
Expander to the HDMI C socket.
ANT
(1–3)
Aerial input socket 1 for future use, 2 for ATSC
tuner, 3 from external aerial/cable TV network.
DTV DATA
For future use.
MASTER LINK
For a compatible Bang & Olufsen audio system.
The socket is also used for BeoLink distribution of
sound/picture throughout the house or for
connection of a BeoMaster.
CENTRE 1
For a centre speaker, such as BeoLab 7. See also
the Guide enclosed with the speaker.
IR IN (9-pin)
For a BeoLink IR-receiver enabling remote control
operation.
MONITOR
For a plasma screen.
CINEMA
For a Home Automation System.
TTL/RS232
Only for use in Hotel setups.
IR IN
For a BeoLink IR-receiver enabling remote control
operation.
IR 1+2
For an external IR-transmitter used with Home
cinema setups.
~
–
Mains supply
Connection to the mains supply.
45