Bang & Olufsen BeoVision 10 Manual - page 15
D
ai
ly u
se
Adjust picture and sound settings
Picture and sound settings are preset from the factory to neutral values which suit
most viewing and listening situations. However, if you wish, you can adjust these
settings to your liking.
Temporary settings
‘DEFAULT VIDEO’
‘DEFAULT AUDIO‘
To only store picture and sound settings until you switch off the TV, press
EXIT
instead of
GO
when you accept the settings.
The speaker combination chosen in the ‘DEFAULT VIDEO’ submenu is activated automatically when you switch on a video
source via the TV.
The speaker combination chosen in the ‘DEFAULT AUDIO’ submenu is activated automatically when you switch on an audio
source via the TV.
Preset volume, bass, treble or loudness, a
connected BeoLab subwoofer and two default
loud speaker combinations. The contents of the
‘SOUND’ menu vary according to what you have
connected to the TV. See also p. 14 about speaker
combinations.
Adjust sound
Adjust brightness, colour and contrast. For
information on picture format, see p. 16.
Adjustments made to the ‘TINT’ setting only
apply to the current source.
Enter and accept
settings
Press
MENU
to bring
up ‘TV SETUP’ menu
Enter and accept
settings
Press
MENU
to bring
up ‘TV SETUP’ menu
Select ‘SOUND
ADJUSTMENT’ menu
Remove the picture from the screen temporarily.
Mute the picture
Press
LIST
repeatedly to display
P.MUTE
on Beo4 and accept
Adjust picture
Select ‘OPTIONS’ to
bring up ‘PICTURE’
menu
Select ‘OPTIONS’ to
bring up ‘SOUND’
menu
PICTURE
BRIGHTNESS
.......
.
.......
CONTRAST
.......
.
.......
COLOUR
.......
.
.......
TINT
.......
.
.......
SIZE
.......
.
.......
HOR. SIZE
.......
.
.......
VERT. SIZE
.......
.
.......
HOR. POSITION
.......
.
.......
VERT. POSITION
.......
.
.......
GAME MODE
select
SOUND ADJUSTMENT
VOLUME
.......
.
.......
BASS
.......
.
.......
TREBLE
.......
.
.......
SUBWOOFER
.......
.
.......
LOUDNESS
ON
DEFAULT VIDEO
SPEAKER3
DEFAULT AUDIO
SPEAKER2
store
15
NTSC signal only
1080p/i signal only
VGA signal only