Bang & Olufsen BeoVision 10 Manual - page 42
First-time setup of your television
TV tuner
Connections
Auto tuning
The ‘TUNING’ menu is only available if the TV tuner is enabled, see pp. 26 and
46.
Select the type of equipment connected to each socket, the sockets used, the
product name, and the source name.
A menu for channel tuning automatically appears on the screen.
Information
This first-time setup procedure is activated when the TV is connected to the mains
and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.
Switch on the TV
Select settings
You are led through the following settings only
when you switch on the TV for the first time.*
1
It takes the TV approx. 20 seconds to start up and
become ready for use.
Switch on
Select setting
Accept and go to next menu item
Set the on-screen menu language
Calibrate the stand, see page 41
Set stand positions, see pp. 41 and 44
Disable or enable internal TV tuner or DVB
Register connected equipment, see p. 35
Tune in TV channels automatically, see also p. 34. Available only if
the TV tuner is enabled, see p. 26
1
*NOTE! When you have selected the preferred
settings in a menu, you may have to press the
green button to continue to the next menu in the
first-time setup procedure. Follow on-screen
instructions.
TV
MENU LANGUAGE
STAND ADJUSTMENT
STAND POSITIONS
TUNER SETUP
CONNECTIONS
AUTO TUNING
40