Bang & Olufsen BeoVision 4 User Manual - page 6

Automatic calibration  

Approximately for every 100 hours of use, the 

TV will initiate a calibration automatically, when 

you press the standby button. 

Manual calibration  

The TV must be switched on for more than two 

minutes and be in TV mode for the AUTO 

COLOUR MANAGEMENT menu to be available.  

We recommend that you let the TV perform calibration automatically instead of manually 

Information 

1

*Manual calibration  

Calibration failed    

Auto Colour Management ensures perfect colours on the screen continuosly. 

During calibration, a sensor arm swings down from the TV frame and an on-screen 

bar changes between various greyscale colours. 

After manual calibration 

Sensor arm retracts and TV returns to last chosen 

source 

CALIBRATION COMPLETE shortly appears on 

screen 

Bring up TV SETUP 

menu 

Select OPTIONS 

menu 

Activate AUTO 

COLOUR 

MANAGEMENT 

Calibration process 

begins*

1

Calibrate colour accuracy of the screen 

All text is removed from the screen, the sensor arm swings down and the 

calibration starts. 

If the sensor arm does not swing down fully, the calibration is not performed 

and the arm is retracted if needed. If the calibration was initiated automatically, 

the TV will attempt to execute the calibration the next time it is switched off. 

NOTE! Never switch off your system or 

disconnect it from the mains during calibration. 

6