Bang & Olufsen BeoVision 8 User Manual - page 21
21
Link room operation
Use sources present only in one of the
rooms …
> Press the button for the source you wish to use;
operate the selected source as usual.
Use a main room source – present in both
rooms …
> Press
LIST repeatedly on Beo4 until LINK* is
shown in the display.
> Press the button for the source you wish to use;
operate the source as usual.
Use a link room source – present in both
rooms …
> Press the button for the source you wish to use;
operate the source as usual.
Listen to stereo sound in your link room …
Usually sound distributed from a main room video
source, such as a settop box, to the link room is
transmitted in mono. However, you can select
stereo sound:
> Press
TV or DTV to switch on the television.
> Press
LIST repeatedly until AV* is shown in the
Beo4 display.
> Press
DTVto activate a source connected to the
main room system, such as a settop box.
While using this function, distribution of other
main room sources to other link room systems is
not possible. You can only listen to stereo sound if
your television is set for Option 6.
*In order to display LINK and AV on Beo4, you
must first add them to the Beo4 list of functions.
For further information, refer to the Guide
enclosed with Beo4.
Main room
Link room