Banks iQ Owner's Manual - page 27
96834 v.4.0
27
NOTE: For vehicles with more
than one tank, enter the front or
main tank capacity only. Do not
add the reserve tank capacity.
Gauges
There are five (5) gauges displayed
in the Economy Mode. See Figure
24. The three (3) to the left of the
screen can be changed to display
the data from a list of available
parameters. The two (2) on the right,
Instant MPG and Average MPG,
can be changed only to increase or
decrease the scale display. Refer to
‘Gauge Placement’ in selection 15
to change the Gauges displayed.
Trip
The Trip feature will keep track of
your vehicles Average Speed, Trip
Distance, Trip Time, Engine On Time,
Cost per Trip, Fuel Used, MPH, Instant
MPG, & Average MPG. You can switch
between two (2) Trip recordings,
‘Trip A’ and ‘Trip B’, by pressing the
letter on the lower right corner of the
Economy Mode screen. See Figure
24. You can view all this information
by pressing on the wrench icon in the
lower left corner of your screen. In
the ‘Options’ menu press on the Trip
information you wish to view. Once
you have viewed the information,
press the return icon to return to the
Options menu or press the iQ icon
to return to the Economy Mode.
Reset Trip Information
The Trip information data can be reset
by pressing and holding the letter
of the trip you wish to clear for 5
seconds on the lower right corner of
the Economy Mode screen. You may
also reset the trip information by going
to the trip data screen for each screen
and press the ‘Reset’ button on the
lower right corner. See Figure 25.
Trip A has the option to reset
automatically. All the data captured
will be reset to zero after the engine
has been off for more than two (2)
hours. To enable this option press on
the wrench icon in the lower left hand
Figure 23