Bannon 57937 Owner's Manual - page 14
Page 14 of 21
Before Each Use
⚠WARNING
Be sure obstructions are not in the fan’s path of operation.
Check that batteries are in good condition in the remote control transmitter.
Operating Instructions
⚠WARNING
To reduce the risk of electric shock, or personal injury, mount to outlet box marked “acceptable for
fan support of 22.7 Kg (50 lb.) or less” and use mounting screws provide with the outlet box and/or
support directly from building structure. Most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a
qualified electrician if in doubt.
To reduce the risk of fire or electrical shock, this fan should only be used with fan speed control
part #: BF-5, manufactured by: Zhongshan Hongwei Motor Manfacturing Co,.Ltd.
To reduce the risk of fire or electrical shock, do not expose fan to water or rain.
Do not use fan near windows; rain and moisture may create an electrical hazard.
Automatically operated device — to reduce risk of injury, disconnect from power supply before
servicing.
If the power supply cord is damaged, contact your local service center or a qualified electrician to
install an appropriate replacement cord to prevent any injury or damage.
The appliance should not be used in locations where special conditions prevail such as the
presence of a corrosive or explosive atmosphere (dust, vapor, gas).
To reduce the risk of injury, do not bend blade holders during installation to motor, balancing or
during cleaning. Do not insert foreign object between rotating blades.
When moving or cleaning fan, turn off power at service panel and lock service disconnecting
means to prevent power being turned on accidently. When the service connecting means cannot
be locked, securely fasten a prominent warning device, such as a tag to the service panel.
This fan should NOT be operated outside.