Baofeng UV-B5 Programming Manual - page 2
Other manuals for UV-B5:
User Manual, User Manual
of
2
Set the radio to communicate at 146.740 MHz simplex
0.
Turn on the radio and make sure it’s unlocked
1.
VM /SCAN (frequency mode)
2.
Select the upper display
AB5
3.
Set the frequency
1 - 4 - 6 - 7 - 4 - 0
4.
Turn off the TDR
M ENU -
(10) - AB5 - OFF - AB5 - M ENU
5.
Turn off the repeater shift direction
M ENU -
(21) - AB5 - 0 - AB5 - M ENU
6.
Rem ove the transm it tone frequency
M ENU -
(12) - AB5 - M ENU (OFF) - AB5 -
M ENU
7.
Set the transm it pow er level
M ENU -
(04) - AB5 - HIGH - AB5 - M ENU
8.
Store the frequency in channel 8
Press and hold VM /SCAN
(8) - AB5
(Note: if the channel num ber is blinking, there
is already a frequency stored there, and this
w ill overw rite it)
The simplex frequency is now stored in radio
m em ory