© b aracoda™ - june 2005 user guide baracoda roadrunners this document is to be used with the baracoda roadrunners package contents check that you have the following items. Contact your reseller if any item is missing. • 1 baracoda roadrunner with rechargeable batteries • 1 pda stylus • 1 charger (5...
Baracoda roadrunners user guide table of content 1 introduction ..................................................................................................2 2 pda stylus ....................................................................................................2 3 recharging the batt...
Baracoda roadrunners user guide 1 introduction the roadrunners are easy to use. Just press the trigger in order to switch on the scanner and simply press it again to scan a barcode. The colours of the leds indicate the status of the device. A beep indicates when the scanner connects to the remote de...
Baracoda roadrunners user guide 5 installing / replacing batteries only use baracoda approved rechargeable batteries. The use of any other batteries may damage the scanner and void the warranty. Please remove the batteries when you are storing the scanner for more than 30 days. To insert batteries i...
Baracoda roadrunners user guide 6 quick start up guide 6.1 how to read barcodes in order to switch on the scanner please keep the trigger pressed for two seconds proper scanning position position the scanner so the light beam fully overlaps and crosses the bar code. The scanner will emit a beep when...
Baracoda roadrunners user guide 6.4 the different ways to connect roadrunners to a host most of wireless barcode scanners in the market are known to be painful to integrate to existing applications. Baracoda proposes 3 ways to simplify this process. Just choose the most appropriate one according to ...
Baracoda roadrunners user guide 4- configure the baracodamanager to connect to the scanner. A. Start the baracodamanager by selecting start> programs> baracodamanager> baracodamanager. The application automatically searches for wireless scanners. B. Place the scanner in discovering mode by pressing ...
Baracoda roadrunners user guide 7 status display summary the roadrunners has two distinct leds, each of them has a particular function and meaning. In the standard mode the right one is the bluetooth connection led (bcl) and the left one is the reading status led (rsl). Please note that the user can...
Baracoda roadrunners user guide 8 configuring your scanner there are two (2) ways to configure your scanner: • when connected to a host device, you can use the baracodamanager for multiple settings (refer to baracodamanager documentation). • or you can use configuration barcodes (refer to the progra...
Baracoda roadrunners user guide • to application window : in this case always double check before starting the uploading that the cursor in your text window is active. Otherwise you will loose all the data saved into your scanner. • to a .Txt file (default option). The baracodamanager gives you the ...
Baracoda roadrunners user guide list of 2-digit identifier codes can be found in the programming guide. You can configure barcode identifier through programming guide (more information in the programming guide). The barcode identifier is disabled in default settings 8.5 beeps and leds you can enable...
Baracoda roadrunners user guide such repair, replacement or refund shall be buyer's sole remedy in the event of manufacturer's breach of this limited warranty. Repaired or replaced parts or product may include new, reconditioned or remanufactured parts and equipment at manufacturer's option. All cos...
