Baracoda RoadRunners Laser User Manual - page 4
Baracoda RoadRunners User Guide
5
Installing / replacing batteries
Only use Baracoda approved rechargeable batteries. The use of any other batteries may damage the scanner
and void the warranty. Please remove the batteries when you are storing the scanner for more than 30 days.
To insert batteries into RoadRunners:
A
1.
Use a coin or your finger to unlock and remove the battery cover at the back of
the RoadRunners. Turn the lock underneath the scanner to a horizontal position.
2.
Slide the battery lid downwards.
3.
Plug the small battery cable into the battery connector (Zone A in Fig. 2).
4.
Insert the Baracoda Battery in its location. Pay attention also to well position the
battery connector.
5.
Slide the cover up and lock it into place.
Fig. 2
Notice : Fully charge batteries before first use.
© Baracoda 2005
Page 3/11