1 operations manual grind by weight accessory ™ esatto tm shown with preciso tm grinder.
1 table of contents introduction ................................................................................................ Parts identification and controls ................................................................ Safety information....... ................................................
2 introduction the baratza esatto tm is a precision, weighing accessory that is designed specifi- cally for use with your baratza maestro plus tm , virtuoso tm or preciso tm or encore tm grinders. This innovative addition to your grinder will allow you to grind precise dosages of coffee using real-t...
3 parts identification timer knob retainer increase / decrease weight / grams removable rear casting grounds bin weight platform start / stop / tare button weight readout window weight preset buttons (3) ™.
4 safety information important information please read the information below very carefully. It contains important tips for the use, safety, maintenance and care of this appliance. Please keep these operating instructions for future refer- ence. Your new esatto tm is rated for either 120 vac or 230 ...
5 assembly 1. Remove the grounds bin from the unit and set aside. 2. Remove the single phillips head screw from the center rear of the rear metal casting cover and slide the rear casting rearward 1cm to remove it. (see photo #1). 3. You must remove the rubber feet from the bottom of the grinder. Use...
6 6. Once the grinder is in place, plug the grinder cord into the ac receptacle inside the base of the esatto tm , and coil the remaining cord in the space under and behind the grinder. (see photo #6). 7. Slide the cast metal cover into place from the rear, taking care to see that the front “fingers...
7 operation and programming start / stop / tare press this button to start the grinder (after selecting a preset button (1,2 or 3). The grinder will stop automatically when the pre-programmed weight has been ground. If you’d like to stop the grinder sooner, press the button again. To tare (zero) the...
8 care and cleaning if the weight display does not count up properly when grinding coffee, remove the grounds bin and blow air under the weighing platform to clear any coffee grounds from the narrow gap under the platform. Do not use any type of tool under the weighing platform. (see photo #10) phot...
9 warranty and service length of warranty: one-year from date of purchase. United states warranty information if your esatto tm fails within one year: e-mail: support@baratza.Com or call 425-641-1245. Baratza will deliver an identical or comparable replacement to your door, free of charge, and arran...
10 grinding notes.
© 2012 baratza, llc 3923-120th ave. S.E. Bellevue, wa. 98006 www.Baratza.Com rev: 021612.
