Operations manual grind by weight accessory ™ esatto tm shown with preciso tm grinder.
1 operations manuals are available in the following languages at www.Baratza.Com english.Pdf spanish.Pdf french.Pdf introduction the baratza esatto tm is an accessory that is designed specifically for use with your baratza maestro plus tm , virtuoso tm or preciso tm . This inno- vative addition to y...
2 parts identification timer knob retainer increase / decrease weight / grams removable rear casting grounds bin weight platform start / stop / tare button weight readout window weight preset buttons (3) ™.
3 safety information important information please read the information be- low very carefully. It contains important tips for the use, safety, maintenance and care of this ap- pliance. Please keep these oper- ating instructions for future refer- ence. Your new esatto tm is rated for ei- ther 120 vac...
4 assembly 1. Remove the grounds bin from the unit and set aside. 2. Remove the single phillips head screw from the center rear of the rear metal casting cover and slide the rear casting rearward 1cm to remove it. (see photo #1). 3. You must remove the rub- ber feet from the bottom of the grinder. U...
5 5. Remove the grounds bin from the grinder and slide the grinder carefully into the esatto tm from the rear going forward until the grinder fits tightly against the front casting. (see photos #4 & #5). 6. Once the grinder is in place, plug the grinder cord into the ac receptacle inside the base of...
6 9. Install the esatto tm timer knob retainer by placing the slot over the blade of the knob, rotate the knob until the retainer is vertical, then slide the retainer into the hole in the base of the esatto tm . The knob will then be held in the on position. (see photo #9 & #10). 10. Plug in the esa...
7 blinks, release the selected but- ton. Repeat for each of the three buttons. The programmed weights will remain stored in memory even if the esatto tm is unplugged. Repeatability and accuracy accurate repeatability is the goal with the esatto tm . With all grind- ers, the output in grams/second va...
8 warranty and service length of warranty: one-year from date of purchase. United states warranty information if your esatto tm fails within one year: e-mail: support@baratza.Com or call 425-641-1245. Baratza will deliver an identical or comparable replacement to your door, free of charge, and arran...
9 grinding notes.
10 © 2011 baratza, llc 3923-120th ave. S.E. Bellevue, wa. 98006 www.Baratza.Com rev: 071511.
