Baratza Maestro Plus Operation Manual - Initial Operation

Initial Operation

P

lace the Maestro Plus Grinder on a level surface.  Insert the plug into a 

120V AC outlet.  Remove the lid from the hopper by lifting off.  Pour the 

desired quantity of roasted whole coffee beans into the hopper up to a 

maximum of 8 oz.  Replace the lid.  Ensure the ground coffee bin is fully 

inserted.

Setting the Grind Control

Slowly rotate the bean hopper 

clockwise or counter clockwise 

to align the indicator on the bean 

hopper with the desired number 

setting on the grind scale.  Select 

the correct grind for the brew pro-

cess you are using.  40 grind set-

tings are available.  The settings 

shown in the table below can be 

used as a general guideline. The actual grind size for a particular setting 

will vary depending on many factors, including: degree of roast (light vs. 

dark), freshness, humidity, type of bean, oil content, etc. With use, you 

will determine the setting that is right for your taste, brewing style and 

your favorite beans.

Note:

Partially ground coffee beans may remain between the burrs after 

the grinder is turned off, adjusting the grind may be easier when the 

grinder is running.  Avoid running the grinder at very fine settings without 

beans as it can damage the burrs.

Setting

Type of Coffee

Grind

1 to 14

Espresso

Fine

16 to 32

Filter / Drip

Medium

34 to 40

Press

Coarse