Baratza Maestro Operation Manual - Troubleshooting

0

Troubleshooting

For a complete and updated troubleshooting guide go to www.baratza.

com FAQ section.

Grinder does not run when switched on.

Insure the hopper is correctly in place and rotated at least  

two clicks clockwise (set to a number less than 40). 

Check the wall outlet with another appliance

Grinder runs when switched on, but coffee does not grind.

The grinder is jammed with coffee.  Go to www.baratza.com for    

detailed instructions to clean out the grinding chamber.

Grinder is operating normally, but stops abruptly.

Immediately turn off the grinder.  A foreign object, such    

as a pebble, green unroasted coffee bean or a twig, may  

have jammed the burrs.  See “Cleaning the Burrs”.

The grind is not fine enough or coarse enough.

Check the grind adjustment.  If that does not solve the adjust 

ment issues, the burrs could be warn and need to be replaced.

If you have additional questions, please check www.baratza.com 

where we answer many frequently asked questions.

1.

2.