Baratza Vario+ Operation Manual

Summary of Vario+

  • Page 1

    Ceramic burr coffee grinder operations manual ™.

  • Page 2: Www.Baratza.Com

    Operations manuals are available in the following languages at www.Baratza.Com english.Pdf spanish.Pdf french.Pdf ceramic burr coffee grinder ™.

  • Page 3: Ceramic Burrs

    Thank you for purchasing the vario ™ coffee grinder. With the vario ™ , it’s now easier than ever to make professional quality coffee, whether at home, the office, or your café. Below are detailed descrip- tions of the features that put the vario ™ in a class of it’s own. Precision, commercial-quali...

  • Page 4: Table of Contents

    Table of contents introduction .......................................................................................... 1 table of contents ................................................................................. 2 parts identification ........................................................

  • Page 5

    Parts identification whole bean hopper (8 oz.) grind time adjustment buttons (2) manual grind button programable grind setting buttons (3) hopper lid micro grind adjustment lever lcd grind time indicator start / stop button upper burr carrier macro grind adjustment lever ceramic burrs ground coffee ...

  • Page 6: Important Information

    Important information please read the information below very carefully. It contains impor- tant tips for the use, the safety and the maintenance and care of this appliance. Please keep these op- erating instructions for future refer- ence. Your new vario ™ is rated for either 120 vac or 230 vac. Ple...

  • Page 7: Initial Set Up

    Initial set up place the vario ™ grinder on a level surface; insert the plug into an ac outlet. Remove the lid from the hopper by lifting off. Pour the desired quantity of roasted whole coffee beans into the hopper up to a maximum of 250 grams. Re- place the lid. Ensure the ground coffee bin or port...

  • Page 8: Normal Grinding Operation

    Normal grinding operation press the desired button (espres- so, filter or press). The blue led next to the button will light and the display lcd will show the corre- sponding programmed grind time in seconds. Press start button to begin grinding. While grinding, the lcd will count down the sec- onds...

  • Page 9: Portaholder

    2. Once you have reached the de- sired time setting, press the corre- sponding button (espresso, filter, or press) and hold for 3 seconds. The time shown in the lcd display will blink to confirm the setting is stored. 3. Repeat steps 1 and 2 above for each of the other two buttons. The quantity of g...

  • Page 10: Care and Cleaning

    Care and cleaning cleaning the housing and hoppers remove any remaining beans from the bean hopper. Press the start button to run any remain- ing beans through the grinder until all grinding is finished. Make a note of each of the three programmed grind times to be used when re-programming grind tim...

  • Page 11: Replacing The Upper Burr

    Replacing the upper burr while rocking the burr side to side, push down firmly on the burr car- rier to ensure that it seats properly. Rotate the burr carrier counter- clockwise until it stops. Replacing the bean hopper to replace the bean hopper, line up the two small tabs on the base of the hopper...

  • Page 12: Warranty and Service

    0 warranty and service length of warranty: one-year from date of purchase. United states warranty information if your grinder fails within one year: e-mail: support@baratza. Com or call 877-701-2021. Baratza will de- liver an identical or comparable replacement grinder to your door, free of charge, ...

  • Page 13: Grinding Notes

    Grinding notes.

  • Page 14

    © 2008 baratza, llc 3923-120th ave. S.E. Bellevue, wa. 98006 www.Baratza.Com rev: 111908.