Barbeques Galore Billabong Instructions Manual - Lighting Your Barbeque
15
Lighting the barbeque is easy, but must be done with due care.
Make sure that the gas is turned on at the cylinder. Also, ensure that the hood is up.
Flame Thrower Ignition - Right Hand Burner
: This ignition
system works by throwing a flame to the side of the burner to
light it. Push the right hand knob inwards and turn anticlockwise
to the high position. Hold the knob in until the burner ignites. You
may need to push and turn the knob several times before ignition.
Left Hand Burner
: Once the right hand burner is alight, you
can light the left hand burner by pushing the knob in and turn
anticlockwise to the high position.
Manual Ignition
: You can light your barbeque manually by
holding a lighted match next to one of the burners, then turning
the burner control knob to high. You can access the burner from
underneath the barbeque.
Lighting The Barbeque
If the burner doesn’t light first go, return the knob to the off position and try a couple more times. If the
burner still does not light, wait a few minutes to allow the gas to disperse before trying again. If satisfactory
operation cannot be achieved, consult your retailer before proceeding.
Note carefully:
Failure to follow the lighting procedures correctly can lead to a hazardous condition.
If You Have Dif
fi
culty Lighting
Lighting Your Barbeque
The knobs have three basic positions:
Off, High and Low. You can achieve
any flame height between low and high
by rotating the barbeque control knob
between these positions.
Controlling The Flames
burner on high
burner on low