Barco MFCD 1219 (TS) Installation & User Manual - 2.3 Connecting The Signals

MFCD 1219 (TS) User's Guide

10

D

2

To secure the panel, slide forward the

locks on both sides of the mounting plate.

Lock the panel with one screw at both

sides (D).

2.3 Connecting the signals

To connect the video & sync signals:

1

Connect one end of the appropriate video

cable to the corresponding video input of

the monitor.

Analog video: Connect to input (2)

DVI: Connect to input (3)

2

Connect the other end of the video cable to

the video output of your video source.

Analog video: Computer graphics board

with analog video output

DVI: Computer graphics board with digital

video output

(1)

(2)

(3)

To connect the power:

1

Connect one end of the proper power cable

to the AC input of the 12V DC adapter.

2

Connect the 12V supply of the 12V DC

adapter to the DC input (1) of the monitor.

3

Connect the other end of the power cord to

a grounded power outlet.