Barco PGWU-62L(-K) User Manual - 6.   Maintenance & Service

44

PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/03/06

6. Maintenance & Service

6.1  Replacing the Lens

6.   MAINTENANCE & SERVICE

Overview

Replacing the Lens

y

Turn the projector off and unplug the power cord. 

1. 

1

Allow the projector to cool down for at least 1 minute then start the lens replacement. 

2. 

2

Remove the lens cover from the projector. 

3. 

3

Rotate the bar upwards and then rotate the lens counterclockwise to remove it from the projector. 

4. 

4

Replace the lens to be installed, be sure the label “

5. 

TOP

” of lens is upward and then push the lens into the 

position. 

5

Rotate the lens clockwise to lock the lens and then rotate the bar downwards. 

6. 

6

Put the lens cover to the projector with the sound “click”. 

7. 

7

Procedure:

VGA-OUT

VGA-IN

LAN

RS-232

12V

OUT

5V

OUT

CVBS

HDMI

DVI

Enter

Menu

1

2

6

7

3

4

Warning: This procedure may only be performed by qualified technical service personnel.

Caution: Do not transport the projector with any lens installed.

Note: Please verify that all the plastic caps removed from the lens prior inserting in the projector.

5