1. DL manuals
  2. Barco
  3. Projector
  4. R9002250
  5. Owner's Manual

Barco R9002250 Owner's Manual

Other manuals for R9002250: Installation Manual

Summary of R9002250

  • Page 1

    R9002250 r9002259 owner's manual data 1209s.

  • Page 2

    Barco projection systems date : 040698 art. No. : r5975708 r9002250 r9002259 owner's manual data 1209s rev. : 00

  • Page 3

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, june 1998. All rights reserved. Trademarks are the rights of their respective owners. Barco nv/projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/56/351...

  • Page 4

    Table of contents i-1 5975708 barcodata 1209s 050698 table of contents ................................................................................................................................................................................. I safety instructions ................................

  • Page 5

    Table of contents i-2 5975708 barcodata 1209s 050698 blanking adjustments ............................................................................................................................................................... 6-15 convergence adjustment .........................................

  • Page 6

    Safety instructions 1-1 5975708 barcodata 1209s 050698 warning to prevent fire or electrical shock hazard, do not expose this equipment to rain or moisture federal communication commission (fcc statement) this equipment has been tested and found to comply with the limits of a class b digital device,...

  • Page 7

    Safety instructions 1-2 5975708 barcodata 1209s 050698 warning for the customers: this apparatus must be grounded (earthed) via the supplied 3 conductor ac power cable. (if the supplied power cable is not the correct one, consult your dealer.) a. Mains lead (power cord) with cee 7 plug: the wires of...

  • Page 8

    Location and function of controls 2-1 5975708 barcodata 1209s 050698 2 rkp 2)) 21 3257 9,'(2 3257 5*%+9 9v\qf 5 * % 32575(027( &20081,&$7,21 352-(&72502'( 32:(50$,16 3257 69,'(2 rkp 21 2)) *5((1rshudwlrqdo 5('vwdqge\ 3257 &rps+v\qf 5 6 2 8 7 5 6 , 1 ,5 5(027( 5 ( 0 2 7 ( ,5 56287 56,1 v nom i max fr...

  • Page 9

    Location and function of controls 2-2 5975708 barcodata 1209s 050698 stand-by sharpness pause/park tint color brightness contrast - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 32a 3$86( 7(;7 (;,7 $'- 67% 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 exlowlq5&8 rkp 2)) 21 3257 9,'(2 3257 5*%+9 9v\qf 5 * %...

  • Page 10

    Connections 3-1 5975708 barcodata 1209s 050698 3 p 21 2 352-(&72502'( 32:(50$,16 3257 69,'(2 rkp 21 2)) *5((1rshudwlrqdo 5('vwdqge\ 5 6 2 8 7 5 6 , 1 ,5 5(027( 5 ( 0 2 7 ( ,5 56287 56,1 v nom i max freq 120/230 volt 7/5amp 50/60hz connections ac power (mains) cord connection use the supplied power c...

  • Page 11

    Connections 3-2 5975708 barcodata 1209s 050698 signal input connection to the projector : - composite video - s-video - rgbs or rgsb - rgb3s or rg3sb (option) - component video rkp 2)) 21 3257 9,'(2 3257 5*%+9 9v\qf 5 * % 32575(027( &20081,&$7,21 352-(&72502'( 32:(50$,16 3257 69,'(2 rkp 21 2)) *5((1...

  • Page 12

    Connections 3-3 5975708 barcodata 1209s 050698 connecting a composite video source to port 1. Composite video signals from a vcr, off air signal decoder, etc.. Video input selection : with the rcu or the build in rcu : press digit button 1 * note : if using the loop-through video output, then set th...

  • Page 13

    Connections 3-4 5975708 barcodata 1209s 050698 connecting a rgb analog source to port 3. Connect your rgb source via an interface to port 3. Always use an interface when a computer and local monitor have to be connected to the projector. Barco interfaces which can be applied : universal analog inter...

  • Page 14

    Connections 3-5 5975708 barcodata 1209s 050698 connecting a rgb analog source with tri-level sync to port 4/5. (option) rgb analog input terminals with tri level sync input or with tri-level sync on green. The projector detects automati- cally where the sync signal is located. Rgb input selection : ...

  • Page 15

    Connections 3-6 5975708 barcodata 1209s 050698 peripheral equipment connecting a rcvds 05 switcher to the projector - up to 20 inputs with the rcvds 05 switcher and up to 90 inputs when 10 rcvds switchers are linked via the expansion modules. - serial communication with the projector. - remote contr...

  • Page 16: Controlling

    Controlling 4-1 5975708 barcodata 1209s 050698 4 fig.1 310a.Drw fig.2 controlling caution : do not display a stationary image with full brightness and contrast for longer than 20 min., otherwise you risk damage to the crt's. Battery installation in the rcu. A new battery is delivered inside the plas...

  • Page 17

    Controlling 4-2 5975708 barcodata 1209s 050698 c) rcu used in a hardwired configuration. Ceiling screen ir sensor rcu 56287 56,1 ,5 5(027( addr a d j e x it stby mute text brightness - + - + - + - + sharpness - + tint c o l o r contrast 0 9 7 8 6 5 4 3 2 1 (17(5 a d d r adj exit stby mute text b r i...

  • Page 18

    Controlling 4-3 5975708 barcodata 1209s 050698 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To continue using your rcu, it is necessary to en...

  • Page 19

    Controlling 4-4 5975708 barcodata 1209s 050698 36 analog picture controls the analog picture controls can be adjusted with the rcu. The control keys are located on the lower right side of the key panel of the rcu and indicated with the name of the control and an icon. When an analog picture control ...

  • Page 20

    5-1 5975708 barcodata 1209s 050698 start up of the adjustment mode 5 start up of the adjustment mode adjustment mode all picture geometry and convergence adjustments are made while in the 'adjustment mode'. Press the adjust key to enter the 'adjustment mode'. You are now in the 'adjustment mode'. Th...

  • Page 21

    5-2 5975708 barcodata 1209s 050698 start up of the adjustment mode enter password xxxx some items in the adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (password protection is only available when the password dip switch on the con...

  • Page 22

    6-1 5975708 barcodata 1209s 050698 random access adjustment mode 6 random access adjustment mode starting-up the random access adjustment mode. Push the control disc up or down to highlight "random access" and then press enter. Some items in the random access mode are password protected (when the pa...

  • Page 23

    6-2 5975708 barcodata 1209s 050698 random access adjustment mode random access adjustment mode convergence h size v size blanking left bottom right top v linearity green only blue on green red on green focusing blue green red blue green red red and blue blue and green red and green color select orbi...

  • Page 24

    6-3 5975708 barcodata 1209s 050698 random access adjustment mode selecting setup pattern if an external source is connected to the projector, this menu will be displayed. Push the control disc up or down to highlight the desired setup pattern and then press enter. Genlocked pattern : internally gene...

  • Page 25

    6-4 5975708 barcodata 1209s 050698 random access adjustment mode select with or to accept to return. Select with or then to return. Random access adjustment mode picture tuning geometry convergence focusing color select orbiting contr. Modulation soft edge select with or to accept to return. Picture...

  • Page 26

    6-5 5975708 barcodata 1209s 050698 random access adjustment mode select with or to accept to return. Clamp tuning highlight clamp tuning by pushing the control disc up or down and press enter to toggle between normal and restoration. Select normal : - for all standard sources and all sources with a ...

  • Page 27

    6-6 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Port 2 : video or s-video port 2 can be used as a video or s-video input. Highlight port 2 by pushing the control disc up or down and press enter to toggle between video and s-video. Select with or to acc...

  • Page 28

    6-7 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Select with or then to return. Focusing before starting the 'focusing' adjustment, be sure the lenses are correctly focused. Push the control disc up or down to select 'focusing' and press enter. Random a...

  • Page 29

    6-8 5975708 barcodata 1209s 050698 random access adjustment mode h phase > 70 h phase > 70 select with or then to return. H phase > 70 geometry adjustments the geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other color images : l...

  • Page 30

    6-9 5975708 barcodata 1209s 050698 random access adjustment mode forbidden area projected raster crt faceplate border phosphor border correct raster position wrong raster position raster shift adjustment the green raster must be centered both horizontally and vertically on the center of the crt surf...

  • Page 31

    6-10 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Left-right left-right (east-west) adjustments left-right adjustments affect only the vertical lines of the projected image. Only the green image is displayed while making left-right adjustments. The red ...

  • Page 32

    6-11 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Select with or then to return. Seagull correction use this correction only if, after adjusting the vertical lines with the side bow or side keystone, still a 's' deformation is visible on the left and th...

  • Page 33

    6-12 5975708 barcodata 1209s 050698 random access adjustment mode top-bottom select with or then to return. Top-bottom (north-south) adjustments top-bottom and center adjustments affect only the horizontal lines of the projected image. To start up the top-bottom and center corrections, follow the ne...

  • Page 34

    6-13 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Select with or then to return. H size too large h size too small ideal image width seagull correction use this correction after the image has been adjusted with top and bottom bow and keystone. If still ...

  • Page 35

    6-14 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Select with or then to return. Image too tall image too short ideal image hight ideal image hight vertical linearity adjustment the vertical linearity adjustment function corrects for vertical non- linea...

  • Page 36

    6-15 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Blanking top bottom left right blanking adjustments blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out u...

  • Page 37

    6-16 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. 25 23 9 15 17 24 22 8 14 16 5 4 1 2 3 20 18 6 10 12 21 19 7 11 13 select with or then to return. Select with or then to return. Select with or then to return. Select with or then to return. G g b b r r c...

  • Page 38

    6-17 5975708 barcodata 1209s 050698 random access adjustment mode select with or then to return. Coarse convergence select with or then to return. Horizontal sides vertical corners select with or then to return. Convergence select with or then to return. Coarse adjustment red on green blue on green ...

  • Page 39

    Service mode 7-1 5975708 barcodata 1209s 050698 7 select with or then to return. Starting up the service mode. Use the control disc to highlight 'service' and then press enter. Some items in the service mode are password protected (when the password function is active). Enter your password to contin...

  • Page 40

    Service mode 7-2 5975708 barcodata 1209s 050698 select with or then to return. Select with or then to return. Select with or to copy to return. Identification highlight 'identification' with the control disc and press enter. The 'identification' screen gives information concerning : - projector addr...

  • Page 41

    Service mode 7-3 5975708 barcodata 1209s 050698 select with or then to return. Select with or to copy to return. Select with or then to return. Deletion of all blocks highlight 'delete all blocks' with the control disc and press enter. Enter gives a confirmation message before deleting. If you are c...

  • Page 42

    Service mode 7-4 5975708 barcodata 1209s 050698 select with or then to return. Select with or then to return. Select with or then to return. Service mode identification copy a block delte a block delete all blocks change password change language run time set to midposition convergence mid more... Ru...

  • Page 43

    Service mode 7-5 5975708 barcodata 1209s 050698 select with or then to return. Service mode identification copy a block delte a block delete all blocks change password change language run time set to midposition convergence mid more... Set to midposition all settings in current block will be overwri...

  • Page 44

    Service mode 7-6 5975708 barcodata 1209s 050698 spot shapes before dynamic astigmatism correction spot shapes after dynamic astigmatism correction diagonal astigmatism correction (use the and arrow key) axial astigmatism correction (use the and arrow key) select with or then to return. Service mode ...

  • Page 45

    Service mode 7-7 5975708 barcodata 1209s 050698 select with or then to return. Select with or then to return. Service mode warning risk of incorrect adjustment of the projector the gamma corrections are factory adjusted using an actas colour analyser ! Therefore, only qualified installtion or servic...

  • Page 46

    Service mode 7-8 5975708 barcodata 1209s 050698 select with or then to return. Select with or then to return. Projector warm up highlight 'projector warm up' by pushing the control disc up or down and press enter to select the projector warm up menu. The on/off option can be toggled with the enter k...

  • Page 47

    Service mode 7-9 5975708 barcodata 1209s 050698 select with or then to return. Service mode dynamic astigmatism g2 adjustment gamma corrections crt run in cycle projector warm up crt drive mode memory banks : on more... Memory banks the user has the possibility to create 8 different memory banks for...

  • Page 48

    Messages, warnings and failures 8-1 5975708 barcodata 1209s 050698 8 messages, warnings and failures when selecting a new source, information about this source will be displayed on the screen. Source number, horizontal and vertical fre- quencies of the displayed source. Source 01 announcement of the...

  • Page 49

    Messages, warnings and failures 8-2 5975708 barcodata 1209s 050698 failure rcvds com- munication error serial communication error be- tween the rcvds and the projec- tor. Failure iris commu- nication error wait starting up iris message during the start up of the iris. Message will disappear when the...

  • Page 50

    9-1 5975708 barcodata 1209s 050698 options 9 ir receiver 800 this infrared receiver unit makes it possible to control the projector from another room. There is a communication line with cable between the ir receiver and the projector or the rcvds05. The control information from the rcu can now be se...

  • Page 51

    9-2 5975708 barcodata 1209s 050698 options magik interface multifuctional analog graphics interface kit. Barco's magik interface allows the user to connect a presentation device such as a projector or a professional monitor to any computer with analog video signal with or without maintaining the con...

  • Page 52

    Orbiting a-1 5975708 barcodata 1209s 050698 a to return. Master orbiting change to slave mode : on speed : fast adjust deviation select with or then deviation adjust : vertical with or horizontal with or to return. Master orbiting change to master mode : on speed : fast adjust deviation select with ...

  • Page 53

    Orbiting a-2 5975708 barcodata 1209s 050698 orbiting speed toggle (only in master orbiting) highlight 'speed : slow' with the control stick and press enter to set the orbiting speed to fast. Highlight 'speed : fast' with the control stick and press enter to set the orbiting speed to slow to return. ...

  • Page 54

    Orbiting a-3 5975708 barcodata 1209s 050698 adjustment procedure multiple projector installations : inportant : to allow corrections in the deviation alignments of the slave projectors, never adjust the deviations of the master projector to its maximum. Default setting of the master projectorn see '...

  • Page 55

    Adjustment blocks and source numbers 90-99 b-1 5975708 barcodata 1209s 050698 adjustment blocks (memory blocks) as the projector is digitally controlled, all geometry and convergence adjustments are stored in the projector’s memory as numeric values. These numeric values are used to control digital ...

  • Page 56

    Adjustment blocks and source numbers 90-99 b-2 5975708 barcodata 1209s 050698 the alternate adjustment block for sources 0 - 9 (projector with rcvds) or 1 - 5 (stand-alone projector) is activated by selecting the corresponding source number 0 - 9 (projector with rcvds) or 1 - 5 (stand-alone projecto...