1. DL manuals
  2. Barco
  3. Monitor
  4. RHDM-2301
  5. User Manual

Barco RHDM-2301 User Manual

Other manuals for RHDM-2301: Brochure, Brochure & Specs, User Manual
Manual is about: Barco 22.5" LCD Broadcast Monitor

Summary of RHDM-2301

  • Page 1

    Rhdm-2301 22.5" - lcd broadcast monitor user manual k5960012-04.

  • Page 2

    2 barco - rhdm-2301 - user manual intentionally left blank.

  • Page 3

    Barco - rhdm-2301 - user manual 3 introduction 1 introduction 1.1 customer notice thank you for buying barco! Barco is a world leader in display and visualization solutions. We are convinced that you will enjoy our products. 1.2 change record revision date description 00 november 2008 initial releas...

  • Page 4

    4 barco - rhdm-2301 - user manual introduction 1.3 contents of the user manual 1.3.1 introductory notes on the content the user manual is divided in different sections. The sections that are relevant to the reader may depend on the readers’ experience level. Get an image on the screen in 5 minutes: ...

  • Page 5

    Barco - rhdm-2301 - user manual 5 introduction 1.3.2 structure of the user manual chapter 1: introduction the introduction contains all general information related to the product, including “about the product”, “important notices” and “safety precautions”. Chapter 2: first operation the basic operat...

  • Page 6

    6 barco - rhdm-2301 - user manual introduction 1.4 about the product the rhdm-2301 is a reliable grade-1 reference monitor for color critical applications in the broadcast and post-production markets, such as: • camera control • program and distribution monitoring • signal qa (quality assurance) • t...

  • Page 7

    Barco - rhdm-2301 - user manual 7 introduction • scanning backlight functionality calibration and stability • compliant with following color standards: ebu 3213 smpte c itu bt.709 xvycc srgb adobe dci • selection of different opto-electric transfer functions (‘gamma’) rec.709 xvycc pure gamma extend...

  • Page 8

    8 barco - rhdm-2301 - user manual introduction • outputs: 2 loop-through outputs control • detachable control panel with main functions and hot keys • ethernet interface with web server • rs485 serial and parallel control or tally/umd • usb: host, peripheral and support of mass storage devices, mous...

  • Page 9

    Barco - rhdm-2301 - user manual 9 introduction 1.5 read carefully important : please read the important notices and safety precautions, mentioned in the following paragraphs, carefully. They provide essential juridical and technical information about the purchased product. 1.6 important notice 1.6.1...

  • Page 10

    10 barco - rhdm-2301 - user manual introduction 1.6.2 copyright © barco n.V., all rights reserved. The information contained herein is barco confidential information. No part of the information contained herein may be disclosed outside of the organization of the recipient, its sub-contractors, and c...

  • Page 11

    Barco - rhdm-2301 - user manual 11 introduction important : opening the cover of the display unit voids the warranty. The warranty does not include the following: • any hardware or software item procured from a source other than barco n.V. Or their official agent or distributor and integrated by cus...

  • Page 12

    12 barco - rhdm-2301 - user manual introduction 1.6.8 open source license this product contains software components released under an open source license. A copy of the source code is available on request by contacting your sales representative. See appendix a for details. 1.6.9 weee in order to avo...

  • Page 13

    Barco - rhdm-2301 - user manual 13 introduction 1.7 safety precautions 1.7.1 earthing warning : the display unit must be earthed correctly. Verify that the power cable is plugged into a standard 3-pin power outlet which is effectively earthed. When using extension cords, make sure that they contain ...

  • Page 14

    14 barco - rhdm-2301 - user manual introduction • do not use the display at extreme limits of temperature and humidity range. Storage and oper- ating limits are specified in the technical specifications of the unit. 1.7.4 requirement for dusty environments the room in which the display unit is insta...

  • Page 15

    Barco - rhdm-2301 - user manual 15 introduction 1.7.7 hazardous materials warning : the lcd panel is composed of multiple layers of glass and protective glass with a small amount of liquid in between. Rough handling or dropping can cause the lcd panel to break. If any part of the skin or body comes ...

  • Page 16

    16 barco - rhdm-2301 - user manual first operation 2 first operation 2.1 unpacking, installation and cabling for unpacking, installation and cabling please refer to: • the quick installation sheet • the section “installation” in the addendum note : the display unit is almost fully mounted when unpac...

  • Page 17

    Barco - rhdm-2301 - user manual 17 first operation different operation interfaces: 1) status bar 2) osd menu 3) toolbox 4) under monitor display bar / picture adjustment bar 5) indicator lights 6) control panel 2.3 switch on the display unit this section is intended for a user who has no experience ...

  • Page 18

    18 barco - rhdm-2301 - user manual first operation note : the display unit has a certain delay time between powering up and displaying an image on the screen (20 seconds). The delay time originates from several internal checks and calibrations that are performed to guarantee the correct display of t...

  • Page 19

    Barco - rhdm-2301 - user manual 19 first operation 2.4 how to register the display unit during the first 200 hours of operation, all features on the display are enabled, so you are able to use your display straight out of the box. In order to continue using your product after that initial grace peri...

  • Page 20

    20 barco - rhdm-2301 - user manual first operation • if the grace period has expired, you will see the “welcome message” with instructions on the screen. Write down the pincode of the display unit that is displayed on the screen, you will need to register it on the website..

  • Page 21

    Barco - rhdm-2301 - user manual 21 first operation 2. Collect the envelope(s) containing a software license sheet with a pincode from the box of the display unit. 3. Register your products and licenses by entering their pincodes on the personalized webpage to obtain license files for your products (...

  • Page 22

    22 barco - rhdm-2301 - user manual first operation figure 4: schematic overview of the registration process step-by-step procedure: 1 login • if you already have an existing my.Barco.Com account, please click ‘login’ and enter your exist- ing user name and password to proceed with the login. • other...

  • Page 23

    Barco - rhdm-2301 - user manual 23 first operation • the welcome screen appears. Click on the left tab ‘register pincodes’..

  • Page 24

    24 barco - rhdm-2301 - user manual first operation 2. Register pincodes • add all pincodes of the new products and licenses to be registered.

  • Page 25

    Barco - rhdm-2301 - user manual 25 first operation • when adding codes, the pincode appears in the list at the bottom of the window • when done entering, click on ‘register’. • a new page (“show products”) will open with a list of all entered pincodes at the top:.

  • Page 26

    26 barco - rhdm-2301 - user manual first operation 3. Assign licenses to products • in the middle of the “show products” page, you have the possibility to assign a license (feature pack) to the monitor of your choice. Select the license you would like to assign to that monitor and click ‘add feature...

  • Page 27

    Barco - rhdm-2301 - user manual 27 first operation 4. Get license file • if you agree with this assignation, click on ‘get license file’ • following page with a link appears. Click the link ‘here’ and save the file on location of your choice..

  • Page 28

    28 barco - rhdm-2301 - user manual first operation 5. Upload license file to monitors • copy the obtained license file to an usb stick, but make sure that the file name is ‘barcolicense’ (no extension, case sensitive) • there is only one license file for all monitors that have been registered with t...

  • Page 29

    Barco - rhdm-2301 - user manual 29 first operation 6. Troubleshooting • if the registration process produces an error, check if the license codes were entered correctly. If the problem persists, contact barco. • you might by mistake assign the wrong license to a monitor with a particular s/n. (e.G. ...

  • Page 30

    30 barco - rhdm-2301 - user manual first operation how to change the license assigned to your display unit: • activate the “admin mode” that you can find in the main menu press (“menu”) to open the osd menu provide the administrator password: administrator password is “313329” • click on “generate n...

  • Page 31

    Barco - rhdm-2301 - user manual 31 first operation figure 5: license osd menu confirming this dialog will remove all feature packs from the display unit and generate a new pincode..

  • Page 32

    32 barco - rhdm-2301 - user manual first operation • the following message is shown on the screen if “generate new pincode” is confirmed: it is recommended to deactivate the admin mode after removing the feature packs from the display unit. • with the newly generated pincode, you can assign new/othe...

  • Page 33

    Barco - rhdm-2301 - user manual 33 first operation 2.5 concepts of operation in this introductory section the concepts of the operation of the display unit will be explained. Details about the operation of the display unit can be found in the chapter “full functionality description”. Control panel t...

  • Page 34

    34 barco - rhdm-2301 - user manual first operation rotary knobs figure 7: location of the image adjustment rotary knobs on the control panel the image adjustment knobs control the settings of background (1), picture (2), saturation (3) and hue (4). Changing these settings will result in the display ...

  • Page 35

    Barco - rhdm-2301 - user manual 35 first operation figure 8: picture adjustment bar when one of the rotary knobs is pressed or turned, the picture adjustment bar is shown at the bottom of the screen. This information bar shows the actual value of all the rotary knobs. Trackball the trackball enables...

  • Page 36

    36 barco - rhdm-2301 - user manual first operation 2.6 how to setup the display unit in this section a number of settings are discussed which are primarily preference settings that can be set by the user. • set the picture ( ! ) to the required luminance. The default value is 100 cd/m 2 . The displa...

  • Page 37

    Barco - rhdm-2301 - user manual 37 how to 3 how to 3.1 legend 3.2 how to change the license installed on the display unit activate the “admin mode” that you can find in the main menu • press ( ) to open the osd menu • provide the administrator password: short press instantaneous effect long press (p...

  • Page 38

    38 barco - rhdm-2301 - user manual how to administrator password is “313329” • activate the “generate new pincode” in the license osd menu: important : do not generate a new pincode unless you plan to install new licenses on your product. Generating a new pincode will disable the license and the fea...

  • Page 39

    Barco - rhdm-2301 - user manual 39 how to confirming this dialog will remove the license and all feature packs from the display unit and generate a new pincode. The following message is shown on the screen if “generate new pincode” is confirmed: it is recommended to deactivate the admin mode after r...

  • Page 40

    40 barco - rhdm-2301 - user manual how to • generate a new license file on my.Barco.Com. • place the license file on a usb stick and connect the usb stick to all display units that need to be updated with the new licenses. • the following message appears when the update is successful and the display...

  • Page 41

    Barco - rhdm-2301 - user manual 41 how to up to 2 inputs can be applied to the sdi board simultaneously. In the table below the possible combinations are shown: to select a valid signal, open the input selection toolbox by pressing long ( ) on the button of the window in which the input signal has t...

  • Page 42

    42 barco - rhdm-2301 - user manual how to in the example shown in the figure above, window 1 is active and shows the signal applied to input 1 on the screen. Pressing ( ) will toggle between the available inputs (input 1 and input 2). Pressing ( ) will select window 2. When window 2 is active, its s...

  • Page 43

    Barco - rhdm-2301 - user manual 43 how to 3.4 how to change the color working space figure 13: location of buttons to change color working space • press ( ) to cycle through the available color working spaces. The current color working space is shown at the top of the screen in the status bar. Or • ...

  • Page 44

    44 barco - rhdm-2301 - user manual how to 3.5 how to visualize the dark levels the dark levels are accessible with the background control on the image adjustments knobs. The background control can be changed between -127 and 128 and is set to 0 by default. The unit of the values of the background co...

  • Page 45

    Barco - rhdm-2301 - user manual 45 how to 3.6 how to maximize contrast to maximize the contrast of the display unit, the following settings can be applied: black correction • when the correctness of the colors at the dark grey levels is of lower importance than the con- trast, the contrast can be en...

  • Page 46

    46 barco - rhdm-2301 - user manual how to set the signal range of the input signal if there are no colors in the headroom and/or the footroom, the contrast can be enhanced by clipping the headroom and/or the footroom. When clipping occurs, a certain portion of the input range of the video signal is ...

  • Page 47

    Barco - rhdm-2301 - user manual 47 how to 3.8 how to enable native interlaced mode (black line inser- tion) set the deinterlace mode to “black line insertion”: • go to the osd menu by pressing ( ) • move with the trackball to highlight the “input settings” in the main menu • press ( ) or ( ) to open...

  • Page 48

    48 barco - rhdm-2301 - user manual how to note : the aspect ratio can be set for each window separately. 3.10 how to select a color channel figure 16: location of buttons to select a color channel 1. Set the color channel • press ( ) • select “channel selection” move with the trackball to highlight ...

  • Page 49

    Barco - rhdm-2301 - user manual 49 how to • when “show in monochrome” is selected, the selected color channel will be shown in mono- chrome. • press ( ) to exit the color adjustments toolbox. 2. Toggle between full color and the selected setting • press ( ) . The setting is applied immediately to th...

  • Page 50

    50 barco - rhdm-2301 - user manual how to the inputs selected for window 1 and window 2 are shown together on the screen. When the display is showing the inputs in pan&zoom or dual view mode, the input settings can still be changed by pressing or to activate the respective window and/or cycle throug...

  • Page 51

    Barco - rhdm-2301 - user manual 51 how to • press ( ) until the pan&zoom setting is selected. Window 1 and window 2 are shown next to each other. • move the “pointer” (using the trackball) to the window where the video signal has to be panned. • press (continuously) to grab the image and use the tra...

  • Page 52

    52 barco - rhdm-2301 - user manual how to • press continuously to lock the place and use the trackball to zoom in/out. When is released, the magnifying glass can be moved to another window or another spot on the screen. Important : when an image is zoomed, pixel repetition is used to display the ima...

  • Page 53

    Barco - rhdm-2301 - user manual 53 how to 3.14.3 loading/storing & erasing presets via osd “presets” • go to the osd menu by pressing ( ) • move with the trackball to select the “presets” in the main menu. • press ( ) or ( ) , or move with the trackball to the right to open the “presets” menu • move...

  • Page 54

    54 barco - rhdm-2301 - user manual how to • move with the trackball to the desired preset press ( ) to “load” or “erase” the selected preset. Press ( ) to “store” to open the store submenu where the name of the preset to be stored can be changed (optionally) and the preset can be stored. Via web int...

  • Page 55

    Barco - rhdm-2301 - user manual 55 how to.

  • Page 56

    56 barco - rhdm-2301 - user manual how to 3.14.4 preset names and filenames the preset names as shown in the load and store submenu's of the osd represent the names of the preset files. Following filename syntax is used: -.Pre : the preset number, 1 for preset 1, 2 for preset 2, ... : the name of th...

  • Page 57

    Barco - rhdm-2301 - user manual 57 how to 3.14.5 transferring presets over usb via osd user presets created on one rhdm monitor can be transferred to another monitor by using an usb stick. Upon plugging in an usb stick a popup menu will appear on the osd with the option to copy presets from usb stic...

  • Page 58

    58 barco - rhdm-2301 - user manual how to 2. Copy preset to usb drive: copies presets from the display to the usb stick. This option is only available if the display has presets. The presets will be located in the root of the usb stick and named 1-....Pre ... 5-....Pre. 3. Cancel: quits the popup me...

  • Page 59

    Barco - rhdm-2301 - user manual 59 how to.

  • Page 60

    60 barco - rhdm-2301 - user manual how to 3.15 how to use the 3d-lut feature 3.15.1 use case post-production professionals must deal with different type of source content that must be conformed, edited, color-graded and finished before the final deliverable is produced. The different types of conten...

  • Page 61

    Barco - rhdm-2301 - user manual 61 how to 3.15.3 3d-lut upload via web interface • connect the display unit to the local network plug an ethernet cable in ethernet port 0 or ethernet port 1. • connect with the pc to the display unit check the ip address that is assigned to the ethernet port. Press (...

  • Page 62

    62 barco - rhdm-2301 - user manual how to • 3d-lut file upload select “user 3d lut” from the selection menu on the left hand side of the webpage. Click on upload file... To go to the “upload custom 3d lut” page. Browse for a user 3d-lut file by clicking on the browse... Button. Note that the file ca...

  • Page 63

    Barco - rhdm-2301 - user manual 63 how to 3.15.4 3d-lut activation via osd “input settings menu” • go to the osd menu by pressing ( ) • move with the trackball to select the “input settings” in the main menu. • press ( ) or ( ) , or move with the trackball to the right to open the “input settings” m...

  • Page 64

    64 barco - rhdm-2301 - user manual how to 3.16 how to upload new software 3.16.1 important notice major and minor software updates exist for the display unit. A major software update is marked by a change in the first order digits (e.G. From 1.Xx to 2.Xx) while a minor software update is marked by a...

  • Page 65

    Barco - rhdm-2301 - user manual 65 how to 3.16.2 software upload via ethernet 1. Connect the display unit to the local network • plug an ethernet cable in ethernet port 0 or ethernet port 1. 2. Connect with the pc to the display unit • check the ip address that is assigned to the ethernet port. Pres...

  • Page 66

    66 barco - rhdm-2301 - user manual how to • open a browser window and type in the address bar: “http://” + the ip address + “/” (e.G. “http://150.158.200.140”). The web interface of the display unit will open..

  • Page 67

    Barco - rhdm-2301 - user manual 67 how to 3. The software upload • select “admin…” from the selection menu on the left hand side of the webpage. • an authentification will be requested. To enter the admin section: user name: “admin” password: “admin117234” • when the valid user name and password are...

  • Page 68

    68 barco - rhdm-2301 - user manual how to • click on “browse” and select the debian software upload package (xxx.Deb) that needs to be uploaded into the display unit. • start the upload of the software by pressing “update”. The upload of new software will start immediately. The pc will show the prog...

  • Page 69

    Barco - rhdm-2301 - user manual 69 how to 3.16.3 software upload via usb 1. Prepare data on usb stick • save the new software upload package (xxx.Deb) on a usb stick. Place the file in the root and not in a folder. Important : make sure that the filename starts with ‘rhdm’ written in lower cases. 2....

  • Page 70

    70 barco - rhdm-2301 - user manual how to • when software update has started (“software update busy”) the usb stick can be removed (all data is already transferred). • the display unit automatically reboots after finishing the software upload. Important : if the upload of the new software would fail...

  • Page 71

    Barco - rhdm-2301 - user manual 71 full functionality description 4 full functionality description 4.1 operation 4.1.1 overview of operation functionalities figure 20: overview of operational controls, indicators and osd functionalities different operation interfaces: 1) status bar 2) osd menu 3) to...

  • Page 72

    72 barco - rhdm-2301 - user manual full functionality description 4.1.2 operational mode overview the operational status of the display unit can be summarized in the figure below: figure 21: operational mode overview.

  • Page 73

    Barco - rhdm-2301 - user manual 73 full functionality description 4.1.3 indicator lights figure 22: location of indicator lights the indicator lights give information about the status of the display unit. Power led: • orange: the display unit is in hard standby. • green: the display unit is powered....

  • Page 74

    74 barco - rhdm-2301 - user manual full functionality description note : the display unit chooses the power source automatically. A valid power source connected to the 100-240vac input has the highest priority. Standby led: • orange: the display unit is powered but is in soft standby mode. All signa...

  • Page 75

    Barco - rhdm-2301 - user manual 75 full functionality description 4.1.4.2 usb port a usb storage device with the latest firmware will immediately be recognized and the display unit will initiate a firmware upload automatically. It is also possible to connect a mouse as a replacement of the trackball...

  • Page 76

    76 barco - rhdm-2301 - user manual full functionality description 4.1.4.6 leds power on and input calibrated: • the power button is lit green. • all other buttons are lit white. Standby: • the power button is lit orange. • all other buttons are lit white. Power on and input not calibrated: • the pow...

  • Page 77

    Barco - rhdm-2301 - user manual 77 full functionality description important : to see which setting causes the cal button to light up amber check the osd submenu “faults and warnings”. Note : the lights behind the buttons go out 10 seconds after all activity on the control panel has stopped. The butt...

  • Page 78

    78 barco - rhdm-2301 - user manual full functionality description • backlight scan mode • light output • color working space • latency of the input signal selected by the active window (0 ms when no signal is connected) the information of the active window (displayed on the screen) is highlighted in...

  • Page 79

    Barco - rhdm-2301 - user manual 79 full functionality description 4.1.8 picture adjustment bar figure 27: screenshot picture adjustment bar the picture adjustment bar appears at the bottom of the screen (over the umd) when the setting of background, picture, saturation or hue is changed. 4.1.9 point...

  • Page 80

    80 barco - rhdm-2301 - user manual full functionality description 4.1.10 toolbox the toolbox of a particular setting appears on the screen when a button is pressed for a long time ( ). The toolbox appears on the left side of the screen and reveals additional settings. A screenshot of the color chann...

  • Page 81

    Barco - rhdm-2301 - user manual 81 full functionality description to the left will close the osd submenu. Moving the track ball to the right will open a deeper osd submenu. Settings can be activated and deactivated by pressing ( ) or by pressing ( ) . The timeout of the osd menu can be set in the os...

  • Page 82

    82 barco - rhdm-2301 - user manual full functionality description 4.2 settings control panel and toolbox 4.2.1 overview buttons control panel the display unit can be operated with the control panel. The control panel is divided in different functional blocks. The functionality of the buttons in each...

  • Page 83

    Barco - rhdm-2301 - user manual 83 full functionality description 4.2.2 control buttons 4.2.2.1 overview control buttons figure 29: control buttons 4.2.2.2 power button 3 fault led lights up when a “fault” is detected by the display unit. 4 image adjustment knobs adjusts the background, picture, hue...

  • Page 84

    84 barco - rhdm-2301 - user manual full functionality description 4.2.2.3 screen select button 4.2.2.4 calibration button function description screen select opens the display information toolbox: • display name: name of the display unit • serial number: serial number of the display unit • software v...

  • Page 85

    Barco - rhdm-2301 - user manual 85 full functionality description 4.2.3 fault led figure 30: fault led the fault led lights up when a hardware failure is detected by the display unit. The fault led does not refer to the display unit operating in non-calibrated mode. When the fault led lights up red,...

  • Page 86

    86 barco - rhdm-2301 - user manual full functionality description 4.2.4 image adjustment knobs figure 31: image adjustment knobs pressing the knob ( ) sets the value back to the calibrated (preset) value. Note : • when the value of the image adjustment knobs deviates from the calibrated value, the d...

  • Page 87

    Barco - rhdm-2301 - user manual 87 full functionality description 4.2.5 function keys 4.2.5.1 overview function buttons figure 32: function buttons 4.2.5.2 select input button input range settings the figure above illustrates the influence of the selected input range on the conversion of the input s...

  • Page 88

    88 barco - rhdm-2301 - user manual full functionality description important : the gamma settings apply to the selected window only. All signals processed by that window ( or ) will be subjected to the gamma settings defined by the customer. Function description select input toggle between input sele...

  • Page 89

    Barco - rhdm-2301 - user manual 89 full functionality description 4.2.5.3 view mode button 4.2.5.4 display and backlight scan mode button function description view mode toggle between different modes. • pan&zoom: window 1 and window 2 are shown next to each other (split screen mode). The signals are...

  • Page 90

    90 barco - rhdm-2301 - user manual full functionality description note : the “black line insertion” mode cannot be combined with the “scanning backlight” mode. When the “scanning backlight” mode is selected, the “black line insertion” mode will automatically be changed to the “deinterlace” mode unti...

  • Page 91

    Barco - rhdm-2301 - user manual 91 full functionality description note : to change a value, select the item that has to be changed using the trackball. Press ( ) or and edit the value with the trackball. The value can also be edited by typing the numbers using the numeric keypad on the control panel...

  • Page 92

    92 barco - rhdm-2301 - user manual full functionality description • use the trackball to cycle through the defined color working spaces. • press ( ) or ( ) to confirm the color working space to be customized. • change the value of an item navigate with the trackball to highlight the setting that nee...

  • Page 93

    Barco - rhdm-2301 - user manual 93 full functionality description undo the changes in a color working space that was not stored: in this case the color working space appears with an asterisk (*) in the status bar on the top of the screen. Select and press the “remove” option (as described above) in ...

  • Page 94

    94 barco - rhdm-2301 - user manual full functionality description the scale mode can be chosen dependent on the view mode ( ). 4.2.5.7 aspect ratio button composition mode native overscan maximized viewport pan&zoom single input x x x x pan&zoom x dual view x function description aspect ratio toggle...

  • Page 95

    Barco - rhdm-2301 - user manual 95 full functionality description 4.2.5.8 safe area marker settings button function description input graphics settings toggle area markers on/off. The area markers indi- cate the safe area on the screen. Safe area settings toolbox appears: • safe areas enabled: enabl...

  • Page 96

    96 barco - rhdm-2301 - user manual full functionality description note : the values shown at “hor” and “ver” indicate the amount of percent that the area is reduced with respect to the arm or image borders at one side of the screen. In total, the horizontal and the vertical size of the image is redu...

  • Page 97

    Barco - rhdm-2301 - user manual 97 full functionality description • press ( ) to open the safe area settings toolbox and select which aspect ratio markers, action safe area or graphics safe area need to be defined. Note : the settings of safe area markers are set separately for window 1 and window 2...

  • Page 98

    98 barco - rhdm-2301 - user manual full functionality description • choose if the action safe area needs to be defined relative to the arm (aspect ratio markers) defined above, or the relative to the original image borders: move with the trackball to highlight the wanted option press ( ) or ( ) to c...

  • Page 99

    Barco - rhdm-2301 - user manual 99 full functionality description press ( ) or ( ) to confirm the new value or press ( ) to restore to the pre- viously selected number note : the values depicted at “hor” and “ver” indicate the amount of percent that the area is reduced with respect to the arm or ima...

  • Page 100

    100 barco - rhdm-2301 - user manual full functionality description press ( ) or ( ) to confirm the new color or press ( ) to undo the restore the previously selected color. 4.2.5.10 color channel selection button 4.2.5.11 monochrome adjustment button function description color channel selection togg...

  • Page 101

    Barco - rhdm-2301 - user manual 101 full functionality description 4.2.5.12 function keys tree.

  • Page 102

    102 barco - rhdm-2301 - user manual full functionality description.

  • Page 103

    Barco - rhdm-2301 - user manual 103 full functionality description.

  • Page 104

    104 barco - rhdm-2301 - user manual full functionality description.

  • Page 105

    Barco - rhdm-2301 - user manual 105 full functionality description 4.2.6 numeric keypad 4.2.6.1 overview numeric keypad buttons figure 35: numeric keypad buttons 4.2.6.2 numeric keypad functionality 4.2.6.3 special function key assignment description … numeric keys from 0 till 9. Exit button. Exit o...

  • Page 106

    106 barco - rhdm-2301 - user manual full functionality description the function keys assigned to the buttons of the numeric keypad are connected to the settings that are available in the osd menu. Via the numeric keypad, a fast shortcut is enabled for frequent use of specific functions. 4.2.7 naviga...

  • Page 107

    Barco - rhdm-2301 - user manual 107 full functionality description 4.3 settings osd menu 4.3.1 main menu to enter the osd main menu: press ( ) . To exit the osd main menu: press ( ) . The osd menus close after a timeout of “x” seconds when the timeout functionality has been activated. Navigation thr...

  • Page 108

    108 barco - rhdm-2301 - user manual full functionality description • operation time: information on the operation time of the different components of the display unit. • temperature: temperature reading of different components of the display unit. • faults and warnings: fault & warning list • licens...

  • Page 109

    Barco - rhdm-2301 - user manual 109 full functionality description • visible: setting to define the visibility mode for the umd bar. Disabled: the umd bar is not visible at the bottom of the screen and not visible in osd. On screen: umd is only visible in osd. • umd controlled by: selects how the um...

  • Page 110

    110 barco - rhdm-2301 - user manual full functionality description 4.3.3.3 gpi settings menu • brightness controlled by: selects the pin of the connector that controls the brightness. The possible settings are: gpi 1, gpi 2, gpi 3 and gpi 4. When control is low: sets the brightness to the specified ...

  • Page 111

    Barco - rhdm-2301 - user manual 111 full functionality description when control is low: sets the color of the left lamp to the specified value when the input sig- nal at the control pin is low. The possible values are: red, green, amber, off when control is high: sets the color of the left lamp to t...

  • Page 112

    112 barco - rhdm-2301 - user manual full functionality description • deinterlace mode: deinterlaced: sets the display unit in a mode that the video images are shown as a sequence of deinterlaced frames. Black line insertion: sets the display unit in a mode that the video images are shown as a sequen...

  • Page 113

    Barco - rhdm-2301 - user manual 113 full functionality description • out of gamut indication: option to verify if parts of the image displayed on the screen are out of gamut of the selected color working space. The display unit has a larger color gamut than the broadcast standards. The image/video w...

  • Page 114

    114 barco - rhdm-2301 - user manual full functionality description 4.3.4.2 resizer settings menu preset: sets the sharpness, anti-aliasing, pixel shape and steepness for some dedicated applications. • video: settings which are ideal for displaying video content. • classic: settings which represent t...

  • Page 115

    Barco - rhdm-2301 - user manual 115 full functionality description sharpness: sets the sharpness of the displayed image. Sharp images may introduce unwanted ringing in the image. The sharpness is thus always a compromise between “sharpness” of the image and reducing the presence of “ringing”. • shar...

  • Page 116

    116 barco - rhdm-2301 - user manual full functionality description figure 38: “anti-aliasing”(a-c) and “sharpness”(d-f) settings in the osd submenu “resizer set- tings” pixel shape: • point: no corrections for the pixel shape are applied. • square: a correction for the square form of the pixels of t...

  • Page 117

    Barco - rhdm-2301 - user manual 117 full functionality description • linear (see figure below-a): the value of the intermittent pixels is determined by a linear inter- polation of the sampling points. • super (see figure below-b): the area between two sampling points is divided in 3 equidistant part...

  • Page 118

    118 barco - rhdm-2301 - user manual full functionality description 4.3.4.3 user 3d-lut menu • enable: enables or disables the user 3d-lut . When enable is checked the user 3d-lut file is loaded and activated. When enable is unchecked the user 3d-lut hardware in the monitor is dis- abled. Notes: the ...

  • Page 119

    Barco - rhdm-2301 - user manual 119 full functionality description 4.3.5 input detection 4.3.5.1 input detection main menu • sync response: sets the response time of the sync detection mechanism on a loss of “sync- locking”. Fast: immediate response on a loss of sync locking by blanking the screen. ...

  • Page 120

    120 barco - rhdm-2301 - user manual full functionality description • measured standard: the standard measured by the display unit on the input. • identifier packet: the packet with standard information identified by the display unit on the input. • use packet identifier: here one can choose whether ...

  • Page 121

    Barco - rhdm-2301 - user manual 121 full functionality description 4.3.5.3 dual link 1-ab menu • measured standard link a: the standard measured by the display unit on link a. • identifier packet link a: the packet with standard information identified by the display unit on link a. • measured standa...

  • Page 122

    122 barco - rhdm-2301 - user manual full functionality description • override signal detection: when checked, the display unit will ignore the measured standard and will display the video signal according to the manual settings. • encoding: sets the encoding of the video signal. This can be rgb or y...

  • Page 123

    Barco - rhdm-2301 - user manual 123 full functionality description • when the 'barco cvm' setting is chosen, the complete rhdm color space is changed so as to look perceptually alike a well-calibrated cvm monitor. In this mode we don't guarantee compli- ance to a technical specification. • in the 'c...

  • Page 124

    124 barco - rhdm-2301 - user manual full functionality description 4.3.7.2 load presets the load submenu has 6 actions: • factory: the first named 'factory' load and applies the factory preset. It basically restores all settings to their factory defaults. The factory preset is unique compared to the...

  • Page 125

    Barco - rhdm-2301 - user manual 125 full functionality description 4.3.7.3 store presets the store submenu is used to store the current user settings into a preset. • the store submenu has 5 entries, numbered 1 to 5 corresponding with preset 1...5. Next to the number is the name of preset which repr...

  • Page 126

    126 barco - rhdm-2301 - user manual full functionality description 4.3.7.4 erase presets the erase submenu has 5 actions, number 1 up to 5 corresponding with preset 1 upto 5. Invoking the action erase the corresponding preset. If that preset is the current active preset, the factory preset is made a...

  • Page 127

    Barco - rhdm-2301 - user manual 127 full functionality description 4.3.10 faults and warnings this menu lists all faults and warnings which have occurred. When a fault occurs, the “fault” led on the control panel and the “cal/err” led on the bezel will light up red. To solve a fault or warning, plea...

  • Page 128

    128 barco - rhdm-2301 - user manual full functionality description 4.3.11 license menu • product serial number: serial number of the product. This number identifies the display unit unambiguously and is necessary to install the license and feature packs. • current pincode: pincode which activates th...

  • Page 129

    Barco - rhdm-2301 - user manual 129 full functionality description important : when a new pincode is generated, all license and feature packs currently activated on the display unit will become inactive. As a result, you will not be able to use the display unit until you have generated a new pincode...

  • Page 130

    130 barco - rhdm-2301 - user manual full functionality description 4.3.12 osd menu tree.

  • Page 131

    Barco - rhdm-2301 - user manual 131 full functionality description.

  • Page 132

    132 barco - rhdm-2301 - user manual full functionality description.

  • Page 133

    Barco - rhdm-2301 - user manual 133 full functionality description 4.4 settings web interface 4.4.1 home page of the display unit figure 40: web interface – home page open a browser window and type in the address bar: “http://” + the ip address + “/” to connect to the display unit via the web interf...

  • Page 134

    134 barco - rhdm-2301 - user manual full functionality description via the web interface, the following settings are available: • input selection • color processing • user 3d lut • scan mode • umd and tally • preset management • system info • power management • documentation • support • admin… 4.4.2...

  • Page 135

    Barco - rhdm-2301 - user manual 135 full functionality description 4.4.3 color processing page.

  • Page 136

    136 barco - rhdm-2301 - user manual full functionality description color processing page the color processing page allows the settings of several parameters that act on the input signal selected by window 1 and window 2. • background: same setting as the “background ” image adjustment knob. • gain: ...

  • Page 137

    Barco - rhdm-2301 - user manual 137 full functionality description 4.4.4 user 3d lut page figure 42: user 3d lut page.

  • Page 138

    138 barco - rhdm-2301 - user manual full functionality description upload file • this webpage allows the user to upload a custom 3d-lut file on the unit. Click on upload file... To go to the “upload custom 3d lut” page. Figure 43: upload custom 3d lut page • browse for a user 3d-lut file by clicking...

  • Page 139

    Barco - rhdm-2301 - user manual 139 full functionality description 4.4.5 scan mode page figure 44: backlight scanning web page activate or deactivate the scanning backlight option. This setting is applied to window 1 and window 2 simultaneously. The current setting is shown when the page is opened o...

  • Page 140

    140 barco - rhdm-2301 - user manual full functionality description 4.4.6 umd page figure 45: umd web page.

  • Page 141

    Barco - rhdm-2301 - user manual 141 full functionality description this web page controls the settings of the umd bar. Under monitor display • visible: visualize or hide the umd bar • controlled by: control the umd bar manually or via the tally port (gpi settings). Manual settings: these settings on...

  • Page 142

    142 barco - rhdm-2301 - user manual full functionality description • signal low: select the color of the text if the signal at the selected pin is low (red, green, amber, off) • signal high: select the color of the text if the signal at the selected pin is high (red, green, amber, off) press “apply”...

  • Page 143

    Barco - rhdm-2301 - user manual 143 full functionality description 4.4.7 preset management page.

  • Page 144

    144 barco - rhdm-2301 - user manual full functionality description figure 46: preset management page.

  • Page 145

    Barco - rhdm-2301 - user manual 145 full functionality description the preset management page combines all preset functionality accesible via the preset osd menu’s (load, store, erase) and the preset tranfer via usb in one interface. • “preset to load” to load either the factory preset or one of the...

  • Page 146

    146 barco - rhdm-2301 - user manual full functionality description 4.4.9 power management page figure 48: power management web page activates or deactivates the standby functionality (soft standby). Press “apply” to send changes on the web page to the display unit..

  • Page 147

    Barco - rhdm-2301 - user manual 147 full functionality description 4.4.10 documentation page figure 49: documentation web page this web page contains the weblink to the documentation explorer at my.Barco.Com. You can use the same id and password as for the licensing of the display unit to access the...

  • Page 148

    148 barco - rhdm-2301 - user manual full functionality description 4.4.11 support page figure 50: support web page on this web page, the contact details of the barco support teams in emea (europe, middle east & asia) and the united states are given. Do not hesitate to contact them for technical assi...

  • Page 149

    Barco - rhdm-2301 - user manual 149 full functionality description 4.4.12 admin... Page figure 51: admin… web page – software update the admin… web page is only accessible with a valid user name and password. • user name: admin • password: admin117234 • this web page allows the user to update the so...

  • Page 150

    150 barco - rhdm-2301 - user manual video signal processing 5 video signal processing 5.1 general the general way of encoding light captured from a scene (with a camera) to a video signal, which serves as input for a display unit, can be described by the following steps: • step 1: light from the sce...

  • Page 151

    Barco - rhdm-2301 - user manual 151 video signal processing figure 52: from captured light on the scene to the image on the screen on the side of the display, the video signal is converted back to light. The following steps are done in the rhdm: • undo step 3: when the color channels have been encod...

  • Page 152

    152 barco - rhdm-2301 - user manual video signal processing • undo step 2: the video signal needs to be converted to the linear light domain by using an opto-electrical transfer function (oetf) . More details about this step will be given in the following sections. The oetf can be defined by the use...

  • Page 153

    Barco - rhdm-2301 - user manual 153 video signal processing in general, we can write any of these encoding standards with the formula: where 5.3 video encoding functions 5.3.1 rec.709 figure 53: l-v’ for rec.709 ( ) 1 0 1 ' / 1 ≤ ≤ ≤ ⎩ ⎨ ⎧ − + = l b b b b l k l k l b v s r s r g s s ( ) ( ) ( ) ( ) ...

  • Page 154

    154 barco - rhdm-2301 - user manual video signal processing 5.3.2 smpte 240m 5.3.3 srgb 5.3.4 xvycc figure 54: l-v’ for xvycc xvycc (based on itu1361) is identical with rec.709 in the legal range of rec.709 (here the interval [0..1], but it extends the rec.709 curve also outside the legal range: 1 0...

  • Page 155

    Barco - rhdm-2301 - user manual 155 video signal processing 5.4 effective gamma the rec.709 encoding equation assumes a linear tail and a power function with an exponent 0.45. However, because of the linear offset and scaling, it is not correct to state that the rec.709 encoding equation is describe...

  • Page 156

    156 barco - rhdm-2301 - user manual video signal processing 5.5 rendering intent it is important to realize that the following statement is wrong: “the video signal must be decoded at the display side in such a way to guarantee a linear system transfer (a linear relation between the scene luminance ...

  • Page 157

    Barco - rhdm-2301 - user manual 157 video signal processing but a gamma of 2.0 sounds very strange in the broadcast world! All these years, video looked good on crts, where people are used to values of gamma of 2.2, 2.5, or even 2.8, but never 2.0. Thus this mean that we have been looking at non-lin...

  • Page 158

    158 barco - rhdm-2301 - user manual video signal processing 5.6 selection of oetfs in the rhdm oetf means “opto-electric transfer function”. An oetf defines the way the input signal (electric) is transferred to luminance at the display side. The video encoding functions explained above are examples ...

  • Page 159

    Barco - rhdm-2301 - user manual 159 video signal processing detailed example: pure gamma the oetf shown below describes the translation of the electric signal to the video drive level. This formula applies for each color. The light output (luminance) y i for each color (i=r,g,b) of an ideal screen i...

  • Page 160

    160 barco - rhdm-2301 - user manual terminology 6 terminology the terminology used throughout the manual is described in detail in this chapter. More information related to the operation and settings of the display unit can be found and is in most cases extended with background information that can ...

  • Page 161

    Barco - rhdm-2301 - user manual 161 terminology black body locus line in the x,y color space that determines the color of the light that is produced by a perfect black body radiator at different temperatures. Black level the black level is the amount of light that is emitted by the lcd panel when it...

  • Page 162

    162 barco - rhdm-2301 - user manual terminology the value of the hue control is expressed in degrees. Figure 58: hue and saturation control input signal description the names of the input signals that are shown in the status bar or in the “select input” toolbox are composed in the following way: nr ...

  • Page 163

    Barco - rhdm-2301 - user manual 163 terminology latency of the display unit the latency is a specification of the time that is needed to convert the input signal into light emitted from the lcd panel, expressed in milliseconds (ms). The latency shown in the status bar is determined by the time diffe...

  • Page 164

    164 barco - rhdm-2301 - user manual terminology monochrome the function monochrome allows the user to exclude the components c b and c r from the y’c b c r signal that is displayed on the lcd panel. Only the luma (y’) information is used to display the image on the screen. The image is displayed in ...

  • Page 165

    Barco - rhdm-2301 - user manual 165 terminology figure 59: picture control pixel map the input signal is mapped to the lcd screen 1:1. Pixel shape (resizer setting) lcd panel pixels are square. To represent an image on an lcd panel, the original image needs to be sampled with a certain spatial resol...

  • Page 166

    166 barco - rhdm-2301 - user manual terminology saturation # similar to the saturation setting on crt display units. Saturation multiplies c b and c r with the same factor. The ratio c b / c r is constant. The value of the saturation control is expressed in %. Safe area the safe area is the part of ...

  • Page 167

    Barco - rhdm-2301 - user manual 167 terminology viewport the viewport setting will cut out the area inside the video that is related to the selected viewport aspect ratio. This can be used to cut black borders from the input signal. White point the white point is situated on/or very close to the bla...

  • Page 168

    168 barco - rhdm-2301 - user manual addendum 7 addendum 7.1 technical specifications 7.1.1 electro-optical specifications 7.1.1.1 panel specifications 7.1.1.1.1 panel active matrix liquid crystal display (amlcd) 7.1.1.1.2 screen dimensions • aspect ratio 16:10 • active screen dimensions: width: 483....

  • Page 169

    Barco - rhdm-2301 - user manual 169 addendum • the maximum deviations of the chromaticity coordinates u’, v’ for 100% white at 25°c are u’ ≤ 0.010 v’ ≤ 0.010 within an angle of ±45° horizontally and ±20° vertically from the perpendicular viewing direction. 7.1.1.1.6 reflection typical values: • tota...

  • Page 170

    170 barco - rhdm-2301 - user manual addendum 7.1.1.1.10 resolution • 1920 x 1200 pixels • active video window: 1920 x 1080 (or less depending on picture format) • pixel dimension: 0.252 x 0.252 mm 7.1.1.1.11 pixel defects and cosmetic specs definitions terms: figure 60: pixel and subpixel definition...

  • Page 171

    Barco - rhdm-2301 - user manual 171 addendum • 0 sets of 2 defect bright subpixels with same color are allowed at a distance between the sets 10 mm • maximum 5 clusters of 2 or more defect bright subpixels within a 5x5 pixel region are allowed. • following table summarizes these conditions: • follow...

  • Page 172

    172 barco - rhdm-2301 - user manual addendum 7.1.1.2 image specifications 7.1.1.2.1 response time • typical rise time: 6 ms • typical fall time: 6 ms 7.1.1.2.2 tolerances tolerance test colors the display unit complies with the following tolerances for the test colors specified in the ebu tech 3325:...

  • Page 173

    Barco - rhdm-2301 - user manual 173 addendum the tolerances are shown for 25°c. Tolerances white point and luminance white point chromaticity and luminance is calibrated at the center of the display for x=0.3127, y=0.3290 and y=100 cd/m 2 (at level 1019) with the following tolerance requirement: the...

  • Page 174

    174 barco - rhdm-2301 - user manual addendum the area of measurement is not greater than a circle of diameter 0.1h. Luminance uniformity on white white point chromaticity and luminance is calibrated at the center of the display for x=0.3127, y=0.3290 and y=100 cd/m 2 (at level 1019). The least brigh...

  • Page 175

    Barco - rhdm-2301 - user manual 175 addendum 7.1.1.3 power supply specification 7.1.1.3.1 power inputs • ac input voltage: 85 - 264 vac 47 - 63 hz input current: 3.6 a at 115 vac and 1.8 a at 230 vac inrush current: maximum 60 a at 230 vac (cold start) • 24 v dc input voltage 21.6 – 26.4 vdc inrush ...

  • Page 176

    176 barco - rhdm-2301 - user manual addendum 7.1.1.4 connectors 7.1.1.4.1 input and output options 1 sdi input board 11 ethernet rj45 (2 ports) 2 sdi input board (optional) 12 24 vdc in 3 optional slot 13 100 – 240 vac in 4 optional slot 14 earth stud 8 9 10 1 2 3 5 4 6 7 11 18 17 13 14 15 12 16 2 1...

  • Page 177

    Barco - rhdm-2301 - user manual 177 addendum figure 61: location of connectors the following input connections are available: • signal inputs • modular concept 2 slots dedicated to sdi input boards 2 slots dedicated to future optional inputs • sdi input board (standard) 4 bnc connectors 2 inputs and...

  • Page 178

    178 barco - rhdm-2301 - user manual addendum power supply output for the control panel • dc power connector: 12 vdc out others • kensington lock important : in order to meet the emi/emc specifications as described in the environmental specifications paragraph, shielded network cables (ethernet, tall...

  • Page 179

    Barco - rhdm-2301 - user manual 179 addendum gpi tally parallel connector • rj45 pinning 4 rx+ 5 rx- 6 tx+ 7 nc 8 nc pin signal 1 gnd 2 gnd 3 gpi 1 4 gpi 2 5 gpi 3 6 gpi 4 7 nc 8 nc 8 1.

  • Page 180

    180 barco - rhdm-2301 - user manual addendum usb connector • type a: host • data rate: usb 2.0 – high speed ethernet connector • rj45 7.1.1.4.4 power ac power connector • iec power connector dc power connector • xlr 4-pins connector 7.1.1.4.5 control panel usb connector • type a: host • data rate: u...

  • Page 181

    Barco - rhdm-2301 - user manual 181 addendum 7.1.2.3 construction drawings figure 62: rhdm-2301 front view (metric units (mm)).

  • Page 182

    182 barco - rhdm-2301 - user manual addendum figure 63: rhdm-2301 top view (metric units (mm)).

  • Page 183

    Barco - rhdm-2301 - user manual 183 addendum figure 64: rhdm-2301 rear view (metric units (mm)).

  • Page 184

    184 barco - rhdm-2301 - user manual addendum figure 65: rhdm-2301 side view (metric units (mm)).

  • Page 185

    Barco - rhdm-2301 - user manual 185 addendum figure 66: rhdm-2301 auxiliary view (front).

  • Page 186

    186 barco - rhdm-2301 - user manual addendum figure 67: rhdm-2301 auxiliary view (back) 7.1.2.4 finishing front • priming coat: beltical filler p1f6 • top coat: 2-component purethane paint. • color: graphite grey ral7024.

  • Page 187

    Barco - rhdm-2301 - user manual 187 addendum • screening: silkscreening (alu ral 9006) back • priming coat: 2-component epoxy primer • top coat: 2-component purethane paint • color: black ral9005 • screening: silkscreening (white) 7.1.3 environmental specifications 7.1.3.1 random vibration • barco t...

  • Page 188

    188 barco - rhdm-2301 - user manual addendum 7.1.3.4.2 en norms • the unit is targeted to meet following en specifications: • en55024 – susceptibility specifications reference test description performance level compliant en 55022 conducted emission a yes en 55022 radiated emission a yes en 61000-3-2...

  • Page 189

    Barco - rhdm-2301 - user manual 189 addendum 7.1.3.4.3 fcc norms • unit meets fcc part 15 level a 7.1.3.4.4 ices norms • unit meets ices-003 level a 7.1.3.5 humidity • operating & storage: max 95% @ 35°c (95°f) 7.1.3.6 altitude/low pressure • operating nom. 3000 m • storage nom. 10000 m 7.1.3.7 acou...

  • Page 190

    190 barco - rhdm-2301 - user manual addendum table 3: noise level measurement results 7.1.3.8 dust class • operational: dust class 8 according to iso14644-1 7.1.4 other specifications 7.1.4.1 mtbf • electronics calculated using mil-hdbk-217f ground benign @ 25°c. • 44800 hr 7.1.4.2 safety unit meets...

  • Page 191

    Barco - rhdm-2301 - user manual 191 addendum 7.1.4.4 compliancy • rohs compliant 7.2 timings 7.2.1 sdi input board 7.2.1.1 signal input • 4 bnc connectors 2 inputs 2 loop-through outputs • accepts the input signals: 2 x sdi 2 x hdsdi 2 x 3gb/s (optional) 1 x dual link (optional) • automatic input de...

  • Page 192

    192 barco - rhdm-2301 - user manual addendum 7.2.1.2 single link sd and hd timings table 4: single link sd and hd timings note : the sd and hd timings are supported by both the rhdm/b and the rhdm/p..

  • Page 193

    Barco - rhdm-2301 - user manual 193 addendum 7.2.1.3 dual link hdsdi timings (optional) table 5: dual link hdsdi timings note : smpte 372m dual link hdsdi timings are supported by the rhdm/p. 1280x720 4:4:4 timings are not defined by any standard, and thus not supported..

  • Page 194

    194 barco - rhdm-2301 - user manual addendum 7.2.1.4 3gb/s timings (optional) table 6: 3gb/s timings note : the smpte 425m 3gb/s timings are supported by the rhdm/p. All level-a and level-b dual link timings are supported by the rhdm/p. The level-b dual stream timings are not supported by the rhdm/p...

  • Page 195

    Barco - rhdm-2301 - user manual 195 addendum 7.3 latency table 7: latency (expressed in ms) for different signals as a function of the scale mode and the display and backlight scan mode. The latency is measured in the middle of the screen according to ebu tech 3325. The values presented in the table...

  • Page 196

    196 barco - rhdm-2301 - user manual addendum 7.4 oetf (opto-electrical transfer function) the oetf defines how each input signal level (v) is transferred to light (l) at the display side. It is defined by the oetf shape, the effective gamma ( γ ) and the displayed video range. Oetf shapes: • xvycc •...

  • Page 197

    Barco - rhdm-2301 - user manual 197 addendum the following table summarizes the recommended settings. However the actual oetf choice is ultimately with the user. “r” stands for recommended and “a” stands for alternative. Table 8: oetf shapes the oetf is a ‘window’ setting. A different oetf can be as...

  • Page 198

    198 barco - rhdm-2301 - user manual addendum • ebu 3123 • smpte rp145 (smpte c) • native • dci • adobe (adobe 1998 rgb) • custom in [x, y] for white point (both rhdm/b and rhdm/p and red, green and blue (only for rhdm/p) the following table summarizes the primaries of the basic color spaces. The nat...

  • Page 199

    Barco - rhdm-2301 - user manual 199 addendum 7.6 mutual effects of scaling and aspect ratio settings the setting of the scaling mode limits in certain cases the setting of the aspect ratio. “h res” and “v res” correspond to the horizontal and vertical resolution respectively. Table 11: mutual effect...

  • Page 200

    200 barco - rhdm-2301 - user manual addendum • for 16:9 signal formats and when the safe area markers are defined relative to the image bor- ders (1920x1080, 1280x720 and wide sd): table 13: safe area markers defined for 16:9 formats and relative to image borders • for 4:3 signal formats and when th...

  • Page 201

    Barco - rhdm-2301 - user manual 201 addendum display unit will place the safe area markers relative to the aspect ratio markers as well and the same percentage is used, as if it were relative to the image borders. Custom aspect ratio marker note: when a custom aspect ratio marker has been specified,...

  • Page 202

    202 barco - rhdm-2301 - user manual addendum • by road: the protest has to be issued against the last road-carrier within 7 days after delivery of the goods. • by air: the protest has to be issued against the air-carrier within 14 days after delivery of the goods. In all cases, a claim or potential ...

  • Page 203

    Barco - rhdm-2301 - user manual 203 addendum • mount the barco stand and the control panel to the display unit. • place one of the protective covers on the bottom of the box. Verify that the opening in the pro- tective cover, shown on the bottom of the image, is placed against the bottom side of the...

  • Page 204

    204 barco - rhdm-2301 - user manual addendum • verify that the holes (see zoom in below) in the protective cover are visible. If not, turn the pro- tective cover around. This is very important since they provide the space that is necessary to accommodate the track ball and the rotary knobs of the co...

  • Page 205

    Barco - rhdm-2301 - user manual 205 addendum inal items provided with the display unit, including cables, user manual and guiding sheets. There is a place at the bottom side foreseen to store these items. • seal the box with tape. • place the box upright (on its bottom side) for transport..

  • Page 206

    206 barco - rhdm-2301 - user manual addendum 7.8.3 mounting instructions 7.8.3.1 barco stand 7.8.3.1.1 barco stand figure 69: display unit mounted on barco stand – vesa mount positions the display unit is delivered with the barco stand already mounted. With the barco stand, the display unit can be p...

  • Page 207

    Barco - rhdm-2301 - user manual 207 addendum 7.8.3.1.3 install the barco stand instructions to mount the barco stand to the display unit: • place the display unit with the front side on a horizontal, flat and stable table, covered with bub- ble wrap or a similar protective material. • mount the barc...

  • Page 208

    208 barco - rhdm-2301 - user manual addendum figure 71: mounting of the barco stand – rear view.

  • Page 209

    Barco - rhdm-2301 - user manual 209 addendum 7.8.3.2 tiltable stand (option) the tiltable stand allows the user to mount the display unit under an angle with respect to the horizontal plane that can vary between -5° and +15°. Figure 72: variation of angles that can be reached with the tiltable stand...

  • Page 210

    210 barco - rhdm-2301 - user manual addendum to change the setting of the stand, turn the knob on the right hand side of the stand counter clockwise to loosen. Choose the new angle and turn the knob clockwise to fix the stand to the new setting. Warning : mind your fingers when tilting the display u...

  • Page 211

    Barco - rhdm-2301 - user manual 211 addendum • mount the barco stand (if necessary) figure 75: bottom view of the control panel and the display unit.

  • Page 212

    212 barco - rhdm-2301 - user manual addendum 7.8.3.4 rack mounting figure 76: rack mounting of the display unit the display unit can be mounted in a standard 19 inch rack by using the rack brackets and the cover bracket. The display unit can be mounted with or without the control panel. 1 2 3 19 inc...

  • Page 213

    Barco - rhdm-2301 - user manual 213 addendum important : the display unit is wider than the opening of a 19 inch rack and will be mounted partly in front of the 19 inch rack. Note : the display unit can be installed in a 19 inch rack without the control panel mounted at the bottom. In order to be ab...

  • Page 214

    214 barco - rhdm-2301 - user manual addendum figure 77: front, top and side view of the mounted rack and cover brackets front view side view top view.

  • Page 215

    Barco - rhdm-2301 - user manual 215 addendum figure 78: installed display unit with control panel in an 19 inch rack.

  • Page 216

    216 barco - rhdm-2301 - user manual addendum 7.8.4 connecting signals and power to the display unit 7.8.4.1 instructions to power up the display unit figure 79: power connections the display unit can be powered with two different power sources. Both power sources can supply power to the display unit...

  • Page 217

    Barco - rhdm-2301 - user manual 217 addendum note : power voltage specifications are available in the technical specifications section. To power-up the display unit: • place the display unit up-right (on the barco stand) or mount the display unit safely into a rack. • connect the power cord of the a...

  • Page 218

    218 barco - rhdm-2301 - user manual addendum 7.8.4.2 instructions to connect the control panel to the display unit figure 80: connection of control panel to display unit to connect the control panel to the display unit: • connect the usb cable (1) and the power cable (2) on the backside of the displ...

  • Page 219

    Barco - rhdm-2301 - user manual 219 addendum 7.9 cleaning instructions before cleaning: • switch off the display unit. • remove the power cord from the mains. Cleaning the lcd screen: • wipe the screen surface with a soft cleaning cloth. • to remove stains, use a damp cloth with non-aggressive clean...

  • Page 220

    220 barco - rhdm-2301 - user manual addendum • image displayed on the screen is distorted, shows bands or stripes. In this case something is wrong with the display unit. Contact barco or your sales representative. 7.10.2 fault and warning list all faults and warnings are shown in the “faults and war...

  • Page 221

    Barco - rhdm-2301 - user manual 221 addendum table 15: fault and warning list the warnings under node “1” can easily be solved by the user. These warning are related to the operation of the display unit out of the calibrated range. These warnings are considered as normal 153 w saturation the saturat...

  • Page 222

    222 barco - rhdm-2301 - user manual addendum operation of the display unit. Please consult the section “full functionality description” for more information. The faults and warnings under node “2” are related to licensing issues. These error codes can only be visualized via the service port and are ...

  • Page 223

    Barco - rhdm-2301 - user manual 223 addendum 7.10.3 "no power" fault finding tree.

  • Page 224

    224 barco - rhdm-2301 - user manual addendum figure 81: “no power” fault finding tree.

  • Page 225

    Barco - rhdm-2301 - user manual 225 addendum 7.10.4 "nothing observed on the screen" fault finding tree.

  • Page 226

    226 barco - rhdm-2301 - user manual addendum figure 82: “nothing observed on the screen” fault finding tree.

  • Page 227

    Barco - rhdm-2301 - user manual 227 addendum 7.10.5 "verify input signal" fault finding tree figure 83: “verify input signal” fault finding tree verify input signal “invalid signal” icon shown on the screen? Yes no yes no apply a valid signal to the display unit. Check if the signal is applied to th...

  • Page 228

    228 barco - rhdm-2301 - user manual addendum 7.11 list of spare parts the display unit is build up with different modules which can be replaced at the factory or at the customers’ site. The following spare part kits can be ordered: • rhdm starter spare kit – k5031251 2 fans rhdm power supply rhdm po...

  • Page 229

    Barco - rhdm-2301 - user manual 229 addendum 7.12 contact information belgium email: support.Smd@barco.Com phone: +32 56 262 350 fax: + 32 56 233 013 united states email: helpdesk.Bcdusa@barco.Com phone: +1 866 992 2726 fax: + 1 678 475 8124 web sites public web site: http://www.Barco.Com partner we...

  • Page 230

    230 barco - rhdm-2301 - user manual addendum 7.13 appendix a - software license 7.13.1 introduction the software running on the internal processor uses software modules licensed under the following open source licenses. 7.13.2 ecos license ecos is free software; you can redistribute it and/or modify...

  • Page 231

    Barco - rhdm-2301 - user manual 231 addendum whose authors commit to using it. (some other free software foundation software is covered by the gnu library general public license instead.) you can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. ...

  • Page 232

    232 barco - rhdm-2301 - user manual addendum having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriatel...

  • Page 233

    Barco - rhdm-2301 - user manual 233 addendum in addition, mere aggregation of another work not based on the program with the program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 3. You may copy an...

  • Page 234

    234 barco - rhdm-2301 - user manual addendum and all its terms and conditions for copying, distributing or modifying the program or works based on it. 6. Each time you redistribute the program (or any work based on the program), the recipient automatically receives a license from the original licens...

  • Page 235

    Barco - rhdm-2301 - user manual 235 addendum each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later ...

  • Page 236

    236 barco - rhdm-2301 - user manual addendum [this is the first released version of the library gpl. It is numbered 2 because it goes with version 2 of the ordinary gpl.] preamble the licenses for most software are designed to take away your freedom to share and change it. By contrast, the gnu gener...

  • Page 237

    Barco - rhdm-2301 - user manual 237 addendum one; be sure to read it in full, and don't assume that anything in it is the same as in the ordinary license. The reason we have a separate public license for some libraries is that they blur the distinction we usually make between modifying or adding to ...

  • Page 238

    238 barco - rhdm-2301 - user manual addendum "source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used ...

  • Page 239

    Barco - rhdm-2301 - user manual 239 addendum work based on the library, the distribution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this...

  • Page 240

    240 barco - rhdm-2301 - user manual addendum when a "work that uses the library" uses material from a header file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if th...

  • Page 241

    Barco - rhdm-2301 - user manual 241 addendum for an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the source code distributed need not include anything that ...

  • Page 242

    242 barco - rhdm-2301 - user manual addendum otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute so as to satisfy simultaneously your obligations under this license and any other pertinent obligations, then a...

  • Page 243

    Barco - rhdm-2301 - user manual 243 addendum free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. No warranty 15. Because the library is licensed free of charge, there is no warranty for the library, to the extent permitted by applicable l...

  • Page 244

    244 barco - rhdm-2301 - user manual addendum 7.14 appendix b - 3d-lut file examples currently the monitor supports three types of user 3d-lut files: truelight, cinespace and autodesk. Below you can find a sample of a valid file for each of the supported types: autodesk sample truelight sample.

  • Page 245

    Barco - rhdm-2301 - user manual 245 addendum cinespace sample.

  • Page 246

    246 barco - rhdm-2301 - user manual abbreviations and acronyms 8 abbreviations and acronyms °c degrees celsius °f degrees fahrenheit a actev actions + events (name of a barco software product) agc automatic gain control alc automatic light control amlcd active matrix liquid crystal display ansi amer...

  • Page 247

    Barco - rhdm-2301 - user manual 247 abbreviations and acronyms cms control room management software cog combined sync on green cr contrast ratio cs combined sync cs conducted susceptibility cvbs composite video blanking sync d dac digital to analog converter dc direct current ddc display data channe...

  • Page 248

    248 barco - rhdm-2301 - user manual abbreviations and acronyms hdmi high definition multimedia interface hdsdi high definition serial digital interface he highly efficient hea high efficiency antireflective hid human interface device hmi human-machine interface i icd interface control document iec i...

  • Page 249

    Barco - rhdm-2301 - user manual 249 abbreviations and acronyms nema national electronics manufacturers association nsl near seamless lcd ntsc national television systems committee o osd on-screen display p pal phase alternating lines ppi pixels per inch pva patterned vertical alignment pvc polyvinyl...

  • Page 250

    250 barco - rhdm-2301 - user manual abbreviations and acronyms svga super video graphics array sxga super extended graphics array t tbc to be confirmed tbd to be defined tbm to be measured tbt to be tested ttl transistor transistor logic u umd under monitor display v vdc volts direct current vesa vi...

  • Page 251

    Barco - rhdm-2301 - user manual 251 table of contents 9 table of contents 1 introduction ..................................................................................... 3 1.1 customer notice ............................................................................... 3 1.2 change record ......

  • Page 252

    252 barco - rhdm-2301 - user manual table of contents 3.1 legend .......................................................................................... 37 3.2 how to change the license installed on the display unit......................... 37 3.3 how to view signals connected to the sdi input bo...

  • Page 253

    Barco - rhdm-2301 - user manual 253 table of contents 4.1.4.5 trackball ............................................................................. 75 4.1.4.6 leds ................................................................................... 76 4.1.5 status bar .................................

  • Page 254

    254 barco - rhdm-2301 - user manual table of contents 4.2.6.1 overview numeric keypad buttons.......................................... 105 4.2.6.2 numeric keypad functionality ................................................ 105 4.2.6.3 special function key assignment .................................

  • Page 255

    Barco - rhdm-2301 - user manual 255 table of contents 4.4.6 umd page ......................................................................................140 4.4.7 preset management page .................................................................143 4.4.8 system info page .......................

  • Page 256

    256 barco - rhdm-2301 - user manual table of contents 7.1.1.3.1 power inputs ................................................................ 175 7.1.1.3.2 power outputs .............................................................. 175 7.1.1.3.3 power consumption ......................................

  • Page 257

    Barco - rhdm-2301 - user manual 257 table of contents 7.2.1.1 signal input ........................................................................ 191 7.2.1.2 single link sd and hd timings ............................................... 192 7.2.1.3 dual link hdsdi timings (optional) ..................

  • Page 258

    258 barco - rhdm-2301 - user manual table of contents 7.13.1 introduction..................................................................................230 7.13.2 ecos license..................................................................................230 7.13.3 gnu general public license......

  • Page 259

    Barco - rhdm-2301 - user manual 259 table of contents figure 31: image adjustment knobs .......................................................................... 86 figure 32: function buttons ...................................................................................... 87 figure 33: locat...

  • Page 260

    260 barco - rhdm-2301 - user manual table of contents figure 68: setup to measure noise levels ..................................................................189 figure 69: display unit mounted on barco stand – vesa mount positions .......................206 figure 70: mounting of barco stand – s...

  • Page 261

    Barco - rhdm-2301 - user manual 261 table of contents end of document.

  • Page 262

    262 barco - rhdm-2301 - user manual table of contents.