Barco RLM-W14 User Manual - page 42
Other manuals for RLM-W14:
Quick Start Manual, Service Manual
Manual is about: DLP DIGITAL PROJECTOR
of
91
RLM W14 08/20/2014
34
5. Getting Started
5.6 Source selection
Press No. 1-5 on the remote control to activate the input source that define in control OSD Or press
on the keypad
to select the input source.
5.7 Changing OSD language
By factory default, the OSD menu of the projector is displayed in English. If you want to change default language. Press the
MENU on Remote control or keypad, then go to Control -> Languages to select the language that you want.
5.8 Adjusting the lens by horizontal and vertical lens shift
Via the remote control directly. Press ENTER key twice to activate lens control menu. Or Press MENU on keypad to call out the
OSD. Then go to Alignment -> Lens Control to use lens shift function.