Bard Aspira Instruction Manual - page 2
Use Instructions:
NOTE: Before beginning this procedure, read the “Warnings”, “Precautions”
and “Adverse Reactions” sections of these instructions for use.
Drainage Procedure:
Using a Wall Suction Unit:
1. Connect the Universal Tubing Adapter to the wall unit suction line.
2.PushtheUniversalTubingAdapterandsuctionlineontothecatheteruntil
you hear or feel a click. Tug gently to ensure the connection is secure.
3. Initiate drainage.
4. When drainage is complete, disconnect Universal Tubing Adapter and wall
suctionlinebysqueezingthewingsontheUniversalTubingAdapterand
gently pulling to separate it from the catheter valve.
5.Wipethecathetervalvewithanewalcoholpad.Placethenewvalve
protector cap over the catheter valve.
WARNING:
Attach the Universal Tubing Adapter to the wall suction line
prior to attaching it to the catheter.
CAUTION:
Use only the Universal Tubing Adapter Adapter to access the catheter
with a wall suction unit, water seal drainage system, glass vacuum
bottle, or other appropriate method.
An issued or revision date for these instructions is included for the user’s
information. In the event two years have elapsed between this date and
product use, the user should contact Bard Access Systems, Inc. to see if
additional information is available.
Revised Date: February 2012
*Bard and Aspira are trademarks and/or registered trademarks of C. R. Bard, Inc.
© 2012 C. R. Bard, Inc. All rights reserved.
Bard Access Systems, Inc.
605 North 5600 West
SaltLakeCity,UT84116U.S.A.
1-801-522-5000
OrderingInformation:1-800-545-0890
ClinicalInformation:1-866-893-2691
www.bardaccess.com
www.myaspira.com
0732944 1202R