BARIX BARIONET 100 Quick Install Manual

Page of 4

Download

Bookmark us

BARIONET

100

Quick Install Guide

Version 2.0

IP Automation Controller with Modbus / TCP and SNMP Support

Package contents

a Barionet 100

b 3wire bus cable

Mounting, Wiring and Setup

Slide the device upwards onto the DIN rail. Push it up and towards the rail

until it snaps onto the upper rail edge. For wiring information please refer

to the second page. Before powering the device please read the user

manual available on www.barix.com.

Firmware

This device comes preloaded with standard firmware.

Alternative firmware can be downloaded from www.barix.com.

Support

For support please contact your local dealer or visit www.barix.com.

to their respective owners and are used for reference only. Barix, Exstreamer and SonicIP are trademarks of Barix AG, Switzerland,

and are registered in certain countries.

Page 1
Barionet 100 quick install guide version 2.0 ip automation controller with modbus / tcp and snmp support package contents a barionet 100 b 3wire bus cable mounting, wiring and setup slide the device upwards onto the din rail. Push it up and towards the rail until it snaps onto the upper rail edge. F...
Page 2
Top view j1 lan port 10/100 (rj45) pin description 1 tx+ (transmit data) 2 tx- (transmit data) 3 txd (receive data) 6 gnd (receive data) 7 rts (ready to send) 8 cts (clear to send) left led link, right led activity (speed/color code see manual) j2 rs-232 serial port pin description 2 rxd (receive da...
Page 3
3 setting temporary ip address using arp command this procedure will work only in a local network. After this procedure the temporary ip will be active only until restart/reboot. After a restart the procedure has to be repeated. Step 1 either use a network cable to link the barionet and the pc direc...
Page 4
1 installation step 1 plug a standard (straight) network cable (not included) into the network port (j1) of the barionet and the other end into your hub or switch. You can also use a crossover network cable (not included) for a direct connection to your pc. Step 2 to power the device wire the positi...