BARIX BARIONET 100 Quick Install Manual - page 2
Top view
J1 LAN port 10/100 (RJ45)
Pin Description
1
TX+ (Transmit data)
2
TX- (Transmit data)
3
TxD (Receive data)
6
GND (Receive data)
7
RTS (Ready to send)
8
CTS (Clear to send)
Left LED Link, right LED Activity (speed/color code see manual)
J2 RS-232 serial port
Pin Description
2
RxD (Receive data)
3
TxD (Transmit data)
5
GND (Ground)
7
RTS (Ready to send)
8
CTS (Clear to send)
1,4,6,9 not connected
J3 Relay outputs (250VAC, 5A)
Pin Description
1
Relay 2 common
2
Relay 2 normally open
3
Relay 2 normally closed
4
Relay 1 common
5
Relay 1 normally open
6
Relay 1 normally closed
J4 Power bus
Pin
Description
1
Power +9..30 VDC (out 1A max.)
2
Ground (GND)
3
Defaults (for factory defaults reverting see manual!)
J5 Dallas 1-wire® bus
Pin
Description
1
Power +9..30 VDC (out 1A max.)
2
Ground (GND)
3
1-wire data
J6 I/O and Power
(4Watt max.)
Pin Description
1..4
Input 1..4 Analog 0..5 VDC or Digital (close to Ground)
5..8
Input 5..8 Digital (close to Ground)
9
Ground for Inputs
10..13
Output 1-4 Digital (Open Collector 0..24 VDC, 100 mA)
14
Ground for Outputs
15
Power In + 9..30VDC
16
Power In -
J7 RS-422/485 port (det. screw term. block)
Pin 422
485
1,6
Shield
Shield
2
RXA
Not used
3
RXB
Not used
4
TXA
A
5 TXB
B