Barkman Harvest Grove BBQ Grill Instruction Manual - page 6
of
12
STEP 2
Lay down the stone pattern shown using 12”, 4” standard and 4”x8”x2
1
/
8
” pieces
along with the vent box. Glue this layer down to the 1
st
layer.
Lay down the stone pattern shown using 12”, 8”, 4” standard and 4”x8”x6
1
/
8
” pieces
along with the tank and drawer frame. Glue the cut ends of the blocks to the tank and
drawer frame for this and future layers. Measure at every step to ensure the remaining
space between the stone and top of frame is 24” minus 4” for every layer of stone.
Check that stones are level at every step. Use included shims for adjustments.
STEP 1
Note: Certain steps indicate the use of landscape glue. This is for added stability
but it’s optional and at the discretion of the user.
6