Harvest grove outdoor kitchen side burner instruction manual.
2 materials included: 12” standard quarry stone - 47 pieces 8” standard quarry stone - 8 pieces 4” standard quarry stone - 18 pieces 4” x 4” x 12” quarry stone - 2 pieces stainless steel vent box 1-piece ebony accent 1-piece ebony countertop slide-in double side burner (liquid propane ready) propane...
3 12” standard quarry stone 4” standard quarry stone 8” standard quarry stone 4” x 4” x 12” quarry stone 1-piece ebony accent stainless steel vent box 1-piece ebony countertop propane line splitter kit (propane only) slide-in double side burner for any issues on sunstone steel components or warranty...
4 step 1 lay down the stone pattern shown using 12” standard pieces. Check that stones are level at every step. Use included shims for adjustments. If installing with the bbq grill, do so on the right-hand side of the bbq. Propane line splitter kit installation is on page 10. Lay down the stone patt...
5 step 3 repeat the pattern from step 1. Lay down the stone pattern shown using 12”, 8”, and 4” standard pieces. Step 4.
6 step 5 repeat the pattern from steps 1 & 3. Repeat the pattern from step 4. Refer to step 6b if installing beside the bbq grill. Step 6a.
7 step 6b if installing side burner beside the outdoor grill, lay down the stone pattern shown of 12”, 8” and 4” standard pieces. Lay down the 1-piece ebony accent band as shown, and make sure it is level. Glue this down to the quarry stone below. Step 7.
8 step 8 lay down the stone pattern shown using 12”, 4” standard and 4”x4”x12” pieces. Lay down the stone pattern shown using 12”, 4” standard and 4”x4”x12” pieces. Make sure that all pieces on this layer are level to receive the countertop. Step 9.
9 step 10 lay down the 1-piece ebony countertop as shown, and make sure it is level. Glue this down to the quarry stone below. Step 11 place the slide-in double side burner into the space provided. Refer to the sunstone manual included with the slide-in double burner for proper use and installation....
10 step 1 attach the longer hose (with 90-degree elbow) onto the side burner. Pull the shorter hose and t-connection with shut-off valve through the hole left between bbq grill and side burner onto the bbq grill side. Step 2 propane line splitter kit installation (propane kit only).
11 step 3 attach the shorter hose onto the bbq grill. Step 4 attach the regulator hose included with the bbq or side burner onto the open threaded end of the t-connection with shut-off valve. Refer to the sunstone manual included with the 4 burner grill 34 ir for leak testing..
M ad e i n c an ada . Follow barkman concrete on facebook, twitter @barkmanconcrete and visit our youtube channel. Www.Barkmanconcrete.Com harvest grove outdoor kitchen kits bbq grill bar with fridge bar counter pizza oven prep station with waste receptacle side burner end units (left and right) cor...
