Barracuda 92330 Owner's Manual - page 2
If for any reason you have questions concerning your new Barracuda Pump, call us toll free at
1-800-495-9278.
Carefully read and understand all of the Warnings and installation instructions in this
manual. Failure to follow these instructions could lead to serious bodily injury and/or
property damage. Retain these instructions for future reference.
This pump has been manufactured with your needs in mind. Properly installed in the right
application, your new Barracuda Pump will give you years of carefree performance.
DANGER
Water and electricity can be dangerous if certain precautions are not
adhered to. This pump is designed to operate perfectly safe in a water environment; however,
improper use and installation can result in personal harm from electrical shock. Please pay
attention to the following warnings.
WARNING
Never touch any electrical device, including this pump, when it is touching water, in water, or
even in a moist environment. Always unplug (disconnect the electricity) when working on or
installing the unit.
WARNING
RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and
grounding-type attachment plug. To reduce the risk of electrical shock, be certain that it is
connected only to a properly grounded, grounding-type receptacle.
WARNING
Do not use the power cord or discharge hose to carry or handle the
pump. Doing so may cause damage to the power cord or discharge hose. Use the carrying
handle supplied with the pump.
WARNING
Always use a grounded outlet. A three-prong mating type receptacle is
needed for safe use. This should be in accordance with the National Electric Code and any
additional codes or laws required by your local government.
NOTICE
It is strongly recommended to use a ground fault interrupt device on any
electrical appliance, including this pump, when used in a wet or moist environment. This is
required by many local codes and enforcement agencies. It is strongly recommended by
Barracuda Pump as it provides a much safer installation and will greatly reduce possible injury
from electrical shock.
REPLACEMENT PARTS
To order replacement parts,
Call 1-800-495-9278
1
4
2
3
5
6
7
8
9
10
Ref #
Description
Part #
1
Power Cord
99008
2
Handle
99050
3
Hose Coupling
99007
4
Oil Fill Plug with O-ring
99055
5
Shaft Seal
99057
6
Impeller
99065
7
Gasket
99062
8
Volute/Base
99069
9
Intake Screen
99073
10
Float Switch with Clamp
92000
2
7