Barracuda 93507 Owner's Manual

Summary of 93507

  • Page 1

    Limited warranty and limitation of liability barracuda warrants this product free from material and /or manufacturing defects for one year from date of purchase. As the sole and exclusive remedy for a breach of this limited warranty, if the product is found by barracuda to be defective, barracuda, a...

  • Page 2

    If for any reason you have questions concerning your new barracuda pump, call us toll free at 1-800-495-9278. Carefully read and understand all of the warnings and installation instructions in this manual. Failure to follow these instructions could lead to serious bodily injury and/or property damag...

  • Page 3

    Troubleshooting (continued) if the pump starts and stops too often: 1. Check for backflow of water from discharge hose/pipe. Install or replace check valve. 2. Check float switch for proper operation. Replace if necessary. If the pump will not shut off: 1. Make sure switch drops to full down positio...

  • Page 4

    Installation (new pump) 1. Set your new pump in the bottom of the basin off to one side. The pump should be placed on a solid foundation. 2. Make sure the float switch will swing freely from the bottom to top without coming in contact with the side of the basin. A minimum of 1” clearance is recommen...