Barracuda 93507 Owner's Manual - page 2
If for any reason you have questions concerning your new Barracuda Pump, call us toll free at
1-800-495-9278.
Carefully read and understand all of the Warnings and installation instructions in this
manual. Failure to follow these instructions could lead to serious bodily injury and/or
property damage. Retain these instructions for future reference.
This pump has been manufactured with your needs in mind. Properly installed in the right
application, your new Barracuda Pump will give you years of carefree performance.
DANGER
Water and electricity can be dangerous if certain precautions are not heeded
to. This pump is designed to operate perfectly safe in a water environment; however,
improper use and installation can result in personal harm from electrical shock. Please pay
attention to the following warnings.
WARNING
Never touch any electrical device, including this pump, when it is touching water, in water, or
even in a moist environment. Always unplug (disconnect the electricity) when working on or
installing the unit.
WARNING
RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and
grounding-type attachment plug. To reduce the risk of electrical shock, be certain that it is
connected only to a properly grounded, grounding-type receptacle.
WARNING
Do not use the power cord or discharge hose/pipe to carry or handle the
pump. Doing so may cause damage to the power cord or discharge hose/pipe. Use the
carrying handle supplied with the pump.
WARNING
Always use a grounded outlet. A three-prong mating type receptacle is
needed for safe use. This should be in accordance with the National Electric Code and any
additional codes or laws required by your local government. If you have questions just call us
at 1-800-495-9278.
NOTICE
It is strongly recommended to use a ground fault interrupt (GFCI) device on
any electrical appliance, including this pump, when used in a wet or moist environment. This
is required by many local codes and enforcement agencies. It is strongly recommended by
Barracuda as it provides a much safer installation and will greatly reduce possible injury from
electrical shock.
Ref. #
Description
Part #
1
Power Cord
2
Handle
99050
3
Oil Fill Plug with O-ring
99056
4
Shaft Seal
99057
5
Impeller
99090
6
Gasket
99064
7
Base
99077
8
Float Switch with cable clamp
92005
REPLACEMENT PARTS
1
2
4
5
7
6
3
8
To order replacement parts,
Call 1-800-495-9278
2
7