Bartington PA1 Operation Manual - page 15
BARTINGTON DEFENCE & SPACE
Page 15 of 19 OM3225/1
WARNING: Ensure the earth bonding wire is firmly re-attached to the panel before
refitting.
7. Absolute Maximum Voltages and Ratings
See the product brochure for the maximum voltages that may be applied to the PA1 Power
Amplifier control input, current monitor output and coil drive output
Refer to the product brochure for this product’s maximum environmental, electrical and
mechanical ratings.
Caution: Exceeding the maximum environmental ratings may cause irreparable damage to
the equipment.
Caution: If these voltages are exceeded, this may cause damage to the equipment.
Caution: Do not make any other connection to these ports.
8. Troubleshooting, Care and Maintenance
In the event of any apparent malfunction, email:
service
@
bartingtondefenceandspace.com
or
telephone the Bartington Defence & Space service team on: +44 (0)1993 706565.
9. Storage and Transport
The PA1 Power Amplifier is a precision electronic instrument and should be treated as such.
Bartington Defence & Space has supplied this product in appropriate packaging for
transportation. This packaging should be used for any future transport.
Due to the weight of the equipment it should be moved by at least two people and carried by each
of the four lower corners.
10. Disposal
This product should not be disposed of in domestic or municipal waste. For information about
disposing of this product safely, check local regulations for disposal of electrical / electronic products.