Bartington PA1 Operation Manual - page 3
BARTINGTON DEFENCE & SPACE
Page 3 of 19 OM3225/1
1. About this Manual
This manual provides the information necessary to help customers install and operate the PA1
Power Amplifier. The PA1 Power Amplifier is one component of Bartington Defence & Space’
One, Two or Three-Axis Helmholtz Coil Control System. This manual should therefore be read in
conjunction with:
•
OM3226
HC1 Helmholtz Coil or
OM3342
HC2 Helmholtz Coil
•
OM3224
CU1 Control Unit.
Both are available via the Helmholtz Coil System product page at
www.
bartingtondefenceandspace.com.
This manual should also be read in conjunction with the product brochure (
DS2613
) and outline
drawings which can also be found on the
product page
.
Photographs of key components are included, labelled with numbers. A number in the text in
square brackets [ ] refers to that label.
Bartington Defence & Space cannot advise on the integration of this equipment with any third
party products.
1.1. Symbols Glossary
The following symbols used within this manual call your attention to specific types of
information:
WARNING: Indicates a situation in which serious bodily injury or death could result if the
warning is ignored.
Caution: Indicates a situation in which bodily injury or damage to your instrument, or both,
could result if the caution is ignored.
Identifies items that must be disposed of safely to prevent unnecessary damage to the
environment.
Note: A paragraph in this format provides useful supporting information on how to make
better use of your purchase.
2. Safe Use
WARNING: The PA1 Power Amplifier is powered by mains electricity and contains
uninsulated parts. Ensure that the unit is properly earthed at all times. Do not open the
casing or have contact with any internal parts except where following a procedure precisely