Bartscher A150513 Instruction Manual - 6.1 Safety Advice
- 26 -
Moisture collector
Detaching of the interception tank:
Grab both sides of the interception
tank and pull.
Attaching of the interception tank:
Insert the upper edge into the cannelure
of the interception tank and press it on.
CAUTION!
After every use the water drop-interception tank should be detached and emptied!
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
Clean all the parts of the device after every use.
o
Let the device cool down before cleaning.
o
Not at any time the inner pot should be cleaned in the dish washer.
o
Wash out the inner pot and the inner lid with a mild cleaning agent and rinse it off
and dry it thoroughly with a dry, soft cloth afterwards. In order to prevent the inner
pot from deformations (which would inhibit a proper contact to the heating surface), it
should not be removed from the outer pot but just be cleaned via a soft, damp cloth.
Make sure that no water enters into the outer pot.
Moisture
collector