Basbau Innovation BB–202 Black Digital Instruction Manual - page 3
2
2. Part List
A. Monitor Unit
B. Camera Unit
Antenna
Chargue LED
Signal LED
Power LED
Power
Strape Holder
Belt Clip/ Stand
Volume Up
Volume Down
A/C Adaptador
Jack
Pairing
Brightness
Up
Brightness
Down
Battery
Cover
A/C Adaptador
Jack
Power
Pairing
Antenna
Lens
3
3. Installation
A. Monitor Unit Installation
1.
As shown in pic. 1, lift the Belt Clip at the back of Monitor Unit, and remove the
battery door.
2.
Insert the Lithium battery in correct direction. Make sure the metal contact of battery
is in touch with the metal contact of battery bay.
3.
Close the battery door.
4.
Charge the battery by using the provided AC adapter. Attach the AC adapter to the
Monitor Unit as shown in pic. 2. Then plug the AC adapter into the wall AC socket.
5.
The battery charging process will start automatically (Charge LED on). For first time
usage, please keep charging the battery for at least 3 hours until the charge LED
goes off.
6.
Press power to power on the Monitor Unit.
B. Camera Unit Installation
1.
Attached the provided AC adapter to the Camera Unit as shown in pic 3. The power
jack is located at the bottom of the Camera Unit. Plug the AC adapter into the wall
AC socket.
2.
Press ‘Power Button’ to power on the Camera Unit.
Pic 2
A/C
Adaptador
Wall Outlet
Pic 1
Pic 3
A/C
Adaptador
Wall Outlet