Basler accessories installation guide housing transpac tph 4000, poe outdoor camera housing with sunshield, ip67 order number 2000032064 document number: aw001300 version: 01 language: 000 (english) release date: 26 march 2014 dr af t.
Contacting basler support worldwide europe and the middle east: basler ag phone: +49 4102 463 515 an der strusbek 60 - 62 fax: +49 4102 463 599 22926 ahrensburg email: support.Euope@baslerweb.Com germany the americas: basler, inc. Phone: +1 610 280 0171 855 springdale drive, suite 203 fax: +1 610 28...
Aw00130001000 introduction housing transpac tph 4000, poe 1 1 introduction purpose of this document this document is designed to give an overview over the technical specifications of the transpac tph 4000 poe housing. It will also explain how to install a camera inside the housing. This document sho...
Introduction aw00130001000 2 housing transpac tph 4000, poe package contents included with the housing are a wall mount as well as various parts needed for installing the wall mount and for mounting a camera inside the housing. Fig. 1: camera housing (internal view) fig. 2: wall mount front window h...
Aw00130001000 introduction housing transpac tph 4000, poe 3 fig. 3: assembly parts items needed for installing the wall mount: 3 plastic anchors 3 stainless steel hex head cap screws 1 l-type hex key items needed for mounting a camera inside the housing: 1 steel socket head cap screw, 1/4" x 1/2" 1 ...
Introduction aw00130001000 4 housing transpac tph 4000, poe dimensions (in mm) fig. 4: dimensions housing maximum dimensions (external): 405 (l) x 150 (w) x 150 (h) maximum camera mounting space: 260 (l) x 90 (w) x 70 (h) fig. 5: dimensions wall mount base 130 126 150 405 370 50 58 89 150 80 94 .9 5...
Aw00130001000 introduction housing transpac tph 4000, poe 5 fig. 6: dimensions wall mount technical specifications external power supply poe+ (30 w) input power supply, ieee802.3at-compliant internal power output poe (15 w), ieee802.3af-compliant 3 x 12 vdc, max. 2.5 a (including heater and fan) hea...
Introduction aw00130001000 6 housing transpac tph 4000, poe electrical information fig. 7: terminal block 3 x 12 vdc.
Aw00130001000 introduction housing transpac tph 4000, poe 7 fig. 8: wiring diagram the unused 12 vdc power outputs can be used to power lens motors, lighting equipment, sirens etc. Certifications ce compliant with en 55022:2010 class b lvd compliant with en 60950-1:2006+a11:2009+a1:2010+a12:2011 fcc...
Mounting a camera aw00130001000 8 housing transpac tph 4000, poe 2 mounting a camera this transpac tph 4000 poe camera housing can accommodate basler ip cameras. Preparing the housing in order to install a basler ip camera inside the housing, you have to remove the camera mounting platform (see fig....
Aw00130001000 mounting a camera housing transpac tph 4000, poe 9 1. Slightly loosen the four screws (circled in red in fig. 9) that hold the platform in place. Don’t remove the screws completely. 2. Slide the camera mounting platform along the screws in order to line up the screws with the holes in ...
Mounting a camera aw00130001000 10 housing transpac tph 4000, poe installation instructions the following figure shows how to install an ip camera. When installing basler cameras, it is recommended to use two small steel washers as well as the large steel washer in order to prevent damaging the came...
Aw00130001000 revision history housing transpac tph 4000, poe 11 revision history doc. Id number date changes aw00130001000 26 mar 2014 initial release of this document..
Revision history aw00130001000 12 housing transpac tph 4000, poe.
