Basler accessories installation guide housing transpac tph 4000, 90 - 240 v and 24 v outdoor camera housing with sunshield, ip67 order numbers 2000032062 2000032063 document number: aw001299 version: 01 language: 000 (english) release date: 26 march 2014 dr af t.
Contacting basler support worldwide europe and the middle east: basler ag phone: +49 4102 463 515 an der strusbek 60 - 62 fax: +49 4102 463 599 22926 ahrensburg email: support.Euope@baslerweb.Com germany the americas: basler, inc. Phone: +1 610 280 0171 855 springdale drive, suite 203 fax: +1 610 28...
Aw00129901000 introduction housing transpac tph 4000, 90 - 240 v and 24 v 1 1 introduction purpose of this document this document is designed to give an overview over the technical specifications of the transpac tph 4000, 90 - 240 v and 24 v, housings. It will also explain how to install a camera in...
Introduction aw00129901000 2 housing transpac tph 4000, 90 - 240 v and 24 v suitable for the following basler camera models: ace aviator pilot scout ip cameras package contents included with the housing are a wall mount as well as various parts needed for installing the wall mount and for mounting a...
Aw00129901000 introduction housing transpac tph 4000, 90 - 240 v and 24 v 3 fig. 2: wall mount fig. 3: assembly parts plastic anchors hex head cap screws plastic pad plastic shoulder washer not required for installation l-type hex key small steel washers socket head cap screw large steel washer.
Introduction aw00129901000 4 housing transpac tph 4000, 90 - 240 v and 24 v items needed for installing the wall mount: 3 plastic anchors 3 stainless steel hex head cap screws 1 l-type hex key items needed for mounting a camera inside the housing: 1 steel socket head cap screw, 1/4" x 1/2" 1 plastic...
Aw00129901000 introduction housing transpac tph 4000, 90 - 240 v and 24 v 5 dimensions (in mm) fig. 4: dimensions housing maximum dimensions (external): 405 (l) x 150 (w) x 150 (h) maximum camera mounting space: 260 (l) x 90 (w) x 70 (h) fig. 5: dimensions wall mount base 130 126 150 405 370 50 58 8...
Introduction aw00129901000 6 housing transpac tph 4000, 90 - 240 v and 24 v fig. 6: dimensions wall mount technical specifications specification camera housing with order number 2000032062 camera housing with order number 2000032063 external power supply 90 - 240 vac input power supply 24 vac input ...
Aw00129901000 introduction housing transpac tph 4000, 90 - 240 v and 24 v 7 electrical information fig. 7: terminal block spare electrical terminals fuse pe (protected earth) ac in.
Introduction aw00129901000 8 housing transpac tph 4000, 90 - 240 v and 24 v fig. 8: wiring diagram the unused 12 vdc power outputs can be used to power lens motors, lighting equipment, sirens etc. Certifications ce compliant with en 55022:2010 class b lvd compliant with en 60950-1:2006+a11:2009+a1:2...
Aw00129901000 mounting a camera housing transpac tph 4000, 90 - 240 v and 24 v 9 2 mounting a camera the transpac tph 4000, 90 - 240 v and 24 v, camera housings can accommodate a variety of basler ip and machine vision cameras. For basler machine vision cameras, an additional camera mount is require...
Mounting a camera aw00129901000 10 housing transpac tph 4000, 90 - 240 v and 24 v preparing the housing in order to install a camera inside the housing, you have to remove the camera mounting platform (see fig. 9) from the housing. The steps required vary slightly depending on the camera model. Fig....
Aw00129901000 mounting a camera housing transpac tph 4000, 90 - 240 v and 24 v 11 by default, the camera mounting platform sits on four spacers (see fig. 10). You have to remove these before you can install a large camera (e.G. A basler aviator) on the mounting platform. 1. Remove the four screws (c...
Mounting a camera aw00129901000 12 housing transpac tph 4000, 90 - 240 v and 24 v 1. Attach the camera mount to the bottom of the camera (step 1). 2. Assemble the screws and washers (step 2). 3. Thread the screw-washer assembly through the camera mounting platform and the plastic pad. 4. Twist the s...
Aw00129901000 mounting a camera housing transpac tph 4000, 90 - 240 v and 24 v 13 1. Assemble the screws and washers (step 1). 2. Thread the screw-washer assembly through the camera mounting platform and the plastic pad. 3. Twist the screw into the bottom of the camera. 4. After positioning, tighten...
Mounting a camera aw00129901000 14 housing transpac tph 4000, 90 - 240 v and 24 v.
Aw00129901000 revision history housing transpac tph 4000, 90 - 240 v and 24 v 15 revision history doc. Id number date changes aw00129901000 26 mar 2014 initial release of this document..
Revision history aw00129901000 16 housing transpac tph 4000, 90 - 240 v and 24 v.
