1. DL manuals
  2. Bat-caddy
  3. Scooter
  4. X3 Pro
  5. User Manual

Bat-caddy X3 Pro User Manual

Other manuals for X3 Pro: User Manual
Manual is about: X3 Series Mobility Scooter

Summary of X3 Pro

  • Page 1

    User manual x3 series (x3, x3 pro & x3r) x3 x3 pro x3r.

  • Page 2: Table Of Contents

    1 attention: please follow all assembly instructions and read and understand the operating instructions before you operate the caddy, either manually or by remote control. Table of contents page packing list …………..…………………………………………………..……………………………………………2 1. Standard parts (x3 & x3-pro)………………………………………...

  • Page 3: Packing List

    2 packing list 1. Standard parts (x3 & x3 pro) 1 caddy frame 2 rear wheels (left & right) 1 battery pack (lead acid or lithium battery, bag, leads) 1 charger 1 tool kit 1 user manual, warranty, terms & conditions 2. Standard parts (x3r) 1 caddy frame 1 anti-tip wheel & pin 2 rear wheels 1 battery pa...

  • Page 4: Parts Glossary

    3 parts glossary 1. X3 & x3 pro 1. T-handle with control face faceplate and manual speed control 2. Upper bag support 3. Upper bag support bungee pigtails 4. Battery with leads and carrying case (12v sealed lead acid or lithium deep cycle) 5. Rear wheels (left & right) 6. Wheel hub with locking mech...

  • Page 5: 2. X3R

    4 2. X3r 1. T-handle with control face faceplate and manual speed control 2. Upper bag support 3. Upper bag support bungee pigtails 4. Battery with leads and carrying case a) (12v 34/35ah sealed lead acid deep cycle) 5. 2 identical rear wheels 6. Wheel hub with locking mechanism 7. Rear wheel rubber...

  • Page 6: Assembly Instructions

    5 assembly instructions 1. X3/x3 pro 1. Unpack all items carefully and check inventory. 2. Place frame structure (one piece) on soft and clean ground to protect frame from being scratched. Erect frame by unfolding and connecting the main frame tube together at the joint and locking the y-shape lower...

  • Page 7

    6 x3 pro 3. Attach wheels to axles by pushing wheel locking button on the wheel hub and inserting the axle extension into the wheel. Make sure to keep the locking button on wheel hub pushed in during this process, in order to enable the axle extensions to be inserted all the way into the wheel so th...

  • Page 8

    7 4. Place battery pack on battery tray and fasten velcro strap around battery tightly. Insert 3 prong battery plug into caddy outlet so notch aligns properly with plug. It is recommended not to fasten the screw on the plug to the outlet, so in case of tip over the cable can unplug from the socket. ...

  • Page 9: 2. X3R

    8 2. X3r 1. Unpack all items carefully and check parts inventory. 2. Place frame structure (one piece) on soft and clean ground to protect frame from being scratched. Attach wheels to axles by pushing wheel locking button on the wheel hub and inserting the axle extension into the wheel. Make sure to...

  • Page 10

    9 6. Place the battery pack on the battery tray and fasten the velcro strap around the battery tightly. Insert the 3-prong battery plug into the caddy outlet so the notch aligns properly. It is recommended not to fasten the screw on the plug to the outlet, so in case of tip over the cable can unplug...

  • Page 11: Operating Instructions

    10 operating instructions 1. X3, x3 pro & x3r handle controls 1. Timed distance advance function : press once, display will show a , the caddy will run ca. 10 yards/meters and stop press twice, display will show b , the caddy will run ca. 20 yards/meters and stop press three times, display will show...

  • Page 12

    11 4. Usb plug (optional) located under handle cover for gps or cell phone. Additional functions tracking adjustment; tracking behavior of all electric caddies is strongly dependent on equal weight distribution on the caddy and slope/topography of the golf course. Test your caddy’s tracking behavior...

  • Page 13

    12 installation of seat attach seat holding bar to caddy frame attach seat stand to seat bottom using the four small screws. Attention: attach in such manner that the seat is parallel to the driving direction of the caddy, with the opening facing the outside when you slide it into the holding bar. S...

  • Page 14

    13 remote control instructions (x3r only) functions: a. Brake: the red stop button in the middle of the directional arrows should be used for stopping the caddy. B. Timer: 10, 20, 30 yards/meters c. Backward arrow: pressing the back arrow will set the caddy in backward motion. Increase backward spee...

  • Page 15

    14 maintenance & additional instructions 1. Battery charging and maintenance (see specific separate instructions for sealed lead acid (sla) and lithium batteries) please obey these precautions for battery use & charging: - please do not charge the battery in a sealed container or in upside down posi...

  • Page 16

    15 be below its optimal power. - always keep your battery fully charged before another game - never keep your battery connected to the grid during prolonged power outages. It might be irreversibly damaged. - do not fully discharge the battery by “overplaying” it. It is recommended to recharge the ba...

  • Page 17

    16 in remote operation. An additional safety feature of this caddy is that it will stop moving if it does not receive a signal from the remote control at least every 45 seconds. This way, should you ever be distracted, your caddy does not completely get away. By pressing the lower timer button on th...

  • Page 18

    17 4. General maintenance the steps below will ensure that you get a prolonged and reliable life out of your bat-caddy. - the caddy has been designed so that the user can concentrate on playing golf, while the caddy does the work of carrying your bag. In order to keep your bat-caddy looking its best...

  • Page 19

    18 - microprocessor controlled electronics system: when you connect the battery, the electronics system will automatically run through a start-up routine. Then you can press the main off/on switch on the handle. The battery charge indicator lights will show you the charge level of the battery from g...

  • Page 20: Technical Specifications

    19 technical specifications 1. X3 & x3 pro model name x3 standard battery 33ah sla dimensions sla: 8 x 5 x 6 in (20 x 13 x 15 cm) weight: 20 lbs average charge time: 4-8 hours lifetime: ca. 150 charges standard battery duration 27-36 holes battery upgrade options 35ah sla @ $25.00 20ah lithium @ $40...

  • Page 21: X3R

    20 rear wheels airless, rubberized tread quick-release mechanism drive train rear wheel drive gear ratio (17:1) handle height adjustment n/a materials aluminum/ss and abs available colors iridium silver, black, white complimentary accessories scorecard holder (depending on promotions) cup holder umb...

  • Page 22

    21 timed forward advance function (10,20,30 yards) cruise control power on/off usb port (optional) distance/range 13 mi(20 km)/27+ holes climbing ability 30 degrees off-power free-wheeling mode maximum load 77 lbs (35 kg) charger input: 110-240v ac output: 12v/3a-4a trickle charger motor power: 2 x ...

  • Page 23: Troubleshooting Guide

    22 troubleshooting guide symptom action caddy does not have power - check all wiring connections and plugs - check battery charge/ - check on/off button/switch motor is running but wheels don’t turn - check if wheels are secured to axle by split pin - check right and left wheel position on x3/x3 pro...

  • Page 24

    23 frequently asked questions (faqs) please check our website at http://batcaddy.Com/pages/faqs.Html for faqs for technical support please contact one of our service centers. Contact info at http://batcaddy.Com/pages/contact-us.Html check our website www.Batcaddy.Com bat-caddy is a registered tradem...