Bat-caddy X3 Pro User Manual

Other manuals for X3 Pro: User Manual
Manual is about: X3 Series Mobility Scooter

Summary of X3 Pro

  • Page 1

    User manual x3 series (x3, x3-lcd & x3r) x3/x3-lcd x3r attention: please follow all assembly instructions and read and understand the operating instructions before you operate the caddy, either manually or by remote control..

  • Page 2: Table Of Contents

    1 table of contents page packing list …………..…………………………………………………..……………………………………………2 1. Standard parts (x3 & x3-lcd)………………………………………………………………………...2 2. Standard parts (x3r)……………………………………………………………………………………...2 3. Optional accessories………………………………………………………………………………………2 parts glossary………………………………………………………...

  • Page 3: Packing List

    2 packing list 1. Standard parts (x3 & x3-lcd) 1 caddy frame 2 rear wheels 1 battery pack (battery, bag, leads) 1 charger 1 tool kit 1 user manual, warranty, terms & conditions 2. Standard parts (x3r) 1 caddy frame 1 anti-tip wheel & pin 2 rear wheels 1 battery pack (battery, bag, leads) 1 charger 1...

  • Page 4: Parts Glossary

    3 parts glossary 1. X3 & x3-lcd 1. T-handle with control face faceplate and manual speed control 2. Upper bag support 3. Upper bag support bungee pigtails 4. Battery with leads and carrying case (12v 26ah or 34/35ah sealed lead acid deep cycle) 5. Rear wheels (left & right) 6. Wheel hub with locking...

  • Page 5: 2. X3R

    4 2. X3r 1. T-handle with control face faceplate and manual speed control 2. Upper bag support 3. Upper bag support bungee pigtails 4. Battery with leads and carrying case a) (12v 34/35ah sealed lead acid deep cycle) 5. 2 identical rear wheels 6. Wheel hub with locking mechanism 7. Rear wheel rubber...

  • Page 6: Assembly Instructions

    5 assembly instructions 1. X3/x3-lcd 1. Unpack all items carefully and check inventory. 2. Place frame structure (one piece) on soft and clean ground to protect frame from being scratched. Erect frame by unfolding and connecting the main frame tube together at the joint and locking the y-shape lower...

  • Page 7

    6 axle extensions to be inserted all the way into the wheel so the axle sprocket locks into the hub. If not locked in, the wheel will not be connected to the clutch and will not be propelled or come off! Test the lock by trying to pull the wheel out. Attention: make sure that the right wheel (marked...

  • Page 8: 2. X3R

    7 2. X3r 1. Unpack all items carefully and check parts inventory. 2. Place frame structure (one piece) on soft and clean ground to protect frame from being scratched. Attach wheels to axles by pushing wheel locking button on the wheel hub and inserting the axle extension into the wheel. Make sure to...

  • Page 9

    8 4. Place the battery pack on the battery tray and fasten the velcro strap around the battery tightly. Insert the 3-prong battery plug into the caddy outlet so the notch aligns properly. Note: before connecting, make sure that the rheostat controller is in off (0) position, and the remote control i...

  • Page 10: Operating Instructions

    9 6. Unpack remote control and install batteries with plus and minus poles as indicated in the diagram in the receiver compartment of the unit. Now you are ready to learn and understand the functions of the manual and remote controls. Operating instructions 1. X3 & x3r t-handle control functions the...

  • Page 11

    10 when your press 20m, the trolley will run 20 meters/yards and stop by itself. When your press 30m, the trolley will run 30 meters/yards and stop by itself. Rheostat control: speed can be seamlessly controlled manually via the round rheostat control on the right side of the handle. Dial clockwise ...

  • Page 12

    11 installation of seat attach seat stand to seat bottom using the four small screws. Attention: attach in such manner that the seat is parallel to the driving direction of the caddy, with the opening facing the outside when you slide it into the holding bar. Slide seat stand into holding bar as sho...

  • Page 13

    12 remote control instructions (x3r only) functions: a. Brake: the red button in the middle of the directional arrows should be used for braking the caddy. B. Timer: 10, 20, 30 yards, stop (same as manual control timer function) c. Backward arrow: pressing the back arrow will set the caddy in backwa...

  • Page 14: 2. X3-Lcd

    13 important notes – please read carefully - change the remote control batteries once the indicator led gets weak - the remote control uses two 1.5v aaa batteries available in any supermarket, drug store, or electronics store - it is recommended to keep a set of extra batteries ready as replacement ...

  • Page 15

    14 please note: distance measurements will only be correct if you travel in a straight line to your ball. The on/off button; this button controls the trolley’s power. Press and hold it for 2-5 seconds for the caddy to turn on/off. The lcd display will light up and show the battery charge level, spee...

  • Page 16

    15 maintenance & additional instructions 1. Battery charging and maintenance please obey these precautions for battery use & charging: - please do not charge the battery in a sealed container or in upside down position. It is recommended to charge the battery in a well ventilated area. - please do n...

  • Page 17

    16 - never keep your battery connected to the grid during prolonged power outages. It might be irreversibly damaged. - do not fully discharge the battery by “overplaying” it. It is recommended to recharge the battery after every 18 holes. 2. Testing your caddy test environment first, make sure that ...

  • Page 18

    17 3. Recommendations for efficient and safe operation - be alert and act responsibly at all times while operating your caddy, just as you would when operating a riding cart, motor vehicle, or any other type of machinery. We absolutely do not recommend the consumption of alcohol or any other impairi...

  • Page 19

    18 looking its best, we advise that you wipe any mud or grass from the frame, wheels and chassis after every round with a damp cloth or paper towel. - never use water hoses or high-pressure jet washers to prevent moisture entering the electronic systems, motors, or gear boxes of the caddy. - remove ...

  • Page 20

    19 therefore, it is sealed to reduce the risk of moisture entering and impacting the electronic system. Breaking this seal increases the risk of damaging the electronics and decreasing the reliability of your caddy. Do not attempt to open the controller case. Doing so will void the warranty! - batte...

  • Page 21: Technical Specifications

    20 technical specifications 1. X3 model name x3 standard battery 26ah sla dimensions: 8 x 5 x 6 in (20 x 13 x 15 cm) average charge time: 4-8 hours lifetime: ca. 150+ charges standard battery duration 27-36 holes battery upgrade options 34/35ah @ $25.00 folded dimensions length: 34 in (86 cm) width:...

  • Page 22: X3-Lcd

    21 handle height adjustment n/a materials aluminum/ss and abs available colors oxidized silver complimentary accessories scorecard holder (depending on promotions) cup holder umbrella holder carrying bag seat optional accessories rain cover sand dispenser club cleaner see "special offers" introduced...

  • Page 23: X3R

    22 battery charge indicator speed control distance measurement distance/range 15 mi (25 km)/27-36 holes climbing ability 30 degrees off-power free-wheeling mode maximum load 66 lbs (30 kg) charger input: 110-240v ac output: 12v/2a-3a trickle charger motor power: 1 x 200 watt (200 watt) 12v dc electr...

  • Page 24

    23 lifetime: ca. 150+ charges standard battery duration 27+ holes battery upgrade options n/a folded dimensions length: 35 in (89 cm) width: 24 in (61 cm) height: 12 in (30.5 cm) unfolded dimensions length: 42 in (107 cm) width: 24 in (61 cm) height: 37 in (94 cm) weight caddy 35 lbs (16 kg) weight ...

  • Page 25: Troubleshooting Guide

    24 carrying bag seat optional accessories rain cover sand dispenser club cleaner see "special offers" introduced (year) 2006 warranty 1 year on parts and labor 1 year on battery troubleshooting guide symptom action caddy does not have power - check fuse in the battery case - check all wiring connect...

  • Page 26

    25 frequently asked questions (faqs) in order to provide our customers with the most accurate and in-depth information please read below some answers to the most frequently asked questions about electric golf caddies in general and bat-caddy in particular. General questions why should i use an elect...

  • Page 27

    26 main disadvantage of this technology was that they tended to cut corners, i.E. Run into bunkers or water hazards once the operator went around them. You also needed to switch them off before you went on the green and walk back to them after putting. Today's remote control technology is more intui...

  • Page 28

    27 current economic climate. We are a global company represented in the us, canada, europe and asia with an array of reputable retailers representing our product line. Bat-caddy questions should i charge the battery once i receive the unit? Bat-caddy: our 12v sealed lead acid batteries come more or ...

  • Page 29

    28 adjustment mechanism. Please open the axle screw and the tracking rod located on the right side of the front wheel. Shift the wheel as needed and tighten the screws in reverse order. During operation make sure the bag is positioned straight, the weight in your bag is evenly balanced and does not ...