Batavia 7062246 Operating Instructions Manual - page 13

13

English

.

A moment of inattention while operating 

power tools may result in serious personal 

injury.

b.  Use safety equipment. Always wear eye 

protection.

Safety equipment such as dust mask, 

non-skid safety shoes, hard hat, or hear-

ing protection used for appropriate condi-

tions will reduce personal injuries.

c.  Avoid accidental starting. Ensure the 

switch is in the off position before plug-

ging in.

Carrying power tools with your finger on 

the switch or plugging in power tools that 

have the switch on invites accidents.

d.  Remove any adjusting key or wrench 

before turning the power tool on.

A wrench or a key left attached to a rotat-

ing part of the power tool may result in 

personal injury.

e.  Do not overreach. Keep proper footing 

and balance at all times.

This enables better control of the power 

tool in unexpected situations.

f.  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

Loose clothes, jewellery or long hair can 

be caught in moving parts.

g.  If devices are provided for the connec-

tion of dust extraction and collection 

facilities, ensure these are connected 

and properly used.

The use of these pieces of equipment 

reduce hazards caused by dust.

4.  Power tool use and care

a.  Do not force the power tool. Use the 

correct power tool for your application.

The correct power tool will do the job 

better and safer at the rate for which it was 

designed.

b.  Do not use the power tool if the switch 

does not turn it on and off.

Any power tool that cannot be controlled 

with the switch is dangerous and must be 

repaired.

c.  Disconnect the plug from the power 

source before making any adjustments, 

changing accessories, or storing power 

tools.

Such preventive safety measures reduce 

the risk of starting the power tool 

accidentally.

d.  Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

Power tools are dangerous in the hands of 

untrained users.

e.  Maintain power tools. Check for mis-

alignment or binding of moving parts, 

breakage of parts and any other condi-

tion that may affect the power tools 

operation. If damaged, have the power 

tool repaired before use.

Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 

and are easier to control.

g.  Use the power tool, accessories and 

tool bits etc., in accordance with these 

instructions and in the manner 

intended for the particular type of 

power tool, taking into account the 

working conditions and the work to be 

performed.

Use of the power tool for operations differ-

ent from intended could result in a hazard-

ous situation.

5.  Service

a.  Please use a qualified expert who uses 

original replacement parts to repair 

your power tool.

This will ensure proper functioning of the 

power tool.

7062246_Maxxheat_Ma_#1503-18.indb   13

10-12-15   11:03