Batca Fusion 3 Owner's Manual - page 2
Batca Fitness Systems
2
Fusion 3 Owner's Manual
__________
Page
Instructions
2
Parts Listing
3-5
Hardware Comparison
6-9
Cable Comparison
10
Main Frame Assembly
11-19
Cable Routing
20-25
Upholstery
26-27
Leg Press Option
28-33
Congratulations on the purchase of your new Fusion 3. This gym will provide you with a
lifetime of enjoyment to meet your strength training needs. Batca Fitness Systems strives to
build the best quality multi-station gyms and to package these gyms in such a way to avoid any
damage during shipping.
In order to get started with your assembly you should first familiarize yourself with
this manual. It is recommended that you read through each step thoroughly before you begin.
Begin by opening your boxes and separating all of your parts. Verify that all parts are
accounted for and have no damage. When all parts are accounted for, you may begin your
assembly. Some items may have been pre-assembled for your convenience. Please note that
hardware quantities shown reflect total quantities for your gym and may not reflect actual
quantities in each bag. Assemble your gym on a solid level surface. This will ensure the best
possible performance, function, and safety for the gym and your workout.
Assemble your gym according to the step by step instructions found in this manual.
Failure to do so will void your warranty and may result in personal injury. After assembly, you
should check each station to ensure correct operation. If a problem arises, recheck your
assembly with these instructions to verify correct assembly. If you are unable to correct a
problem or have questions with your assembly please contact your authorized Batca dealer.
Batca Fitness Systems has built this gym to give you a safe, effective and
enjoyable workout. However, there is a risk assumed by individuals who use this
type of equipment. It is very important that all warnings and instructions are
read and followed before beginning any exercise program.
It is also very important to read and follow the preventative maintenance
schedule described in this manual. If any of the warning labels or stickers are
worn, faded, torn, scratched or missing they should be replaced immediately.
WARNING: There is a risk assumed by individuals who use this type of equipment. To
minimize risk always follow these rules.
1) It is essential that you consult with your physician before beginning any
exercise program.
2) Inspect equipment before each use for loose, worn, or frayed parts (including
cables, nuts and bolts). Replace parts at first signs of wear (use only genuine
BATCA replacement parts). Use of equipment that is damaged, worn, frayed or
not completely assembled on a solid, level surface may result in injury.
3) Make sure all adjustment pins are fully engaged before using equipment.
4) Keep all parts of the body and clothing outside the path of any moving parts of
the gym. Be alert to the possibility of injury. Do not be careless.
5) Minors and children should not be allowed to play on or around this gym.
6) If you have any questions on proper use or maintenance of this gym, do not
hesitate to call your local BATCA FITNESS SYSTEMS distributor or BATCA
FITNESS SYSTEMS at (919) 255-1233. www.batcafitness.com
__________
Page
Leg Press Cable Routing
32
Leg Press Attachment
34
Weight Stack Decals and Serial Number
35
Cable Tension and Adjustments
36-37
Final Assembly and Troubleshooting
38
Maintenance
39
Warranty
40
Floor plan Layout
41-42
Table of Contents
Instructions
Warning